Owner manual

Pach and Company Chapter 3 Page 18
AeGIS NPB9000 Series PROGRAMMING 05/01/02
FUNCTION CODE LOCAL PROGRAMMING
12
SET TIME AND DATE
• Time must be in military format.
• Time and Date must be set
according to the current local
time for event recording, time zone
and auto unlock schedules.
*THE SYSTEM WILL NOT
CHANGE TO NEW
DAYLIGHT SAVING TIME
AUTOMATICALLY.
FOLLOW THE STEP BELOW:
1.YOU MUST BE ON SITE
2. SELECT FUNCTION CODE 12
3. SET NEW TIME
4.SELECT“0”FOR NO
DAYLIGHT SAVING.
5. CONTINUE ALL STEPS.
6. YOU DO NOT NEED TO BE
ON SITE TO SET THE DAY-
LIGHT SAVING THE FOLLOW-
ING YEAR. USE SOFTWARE
TO SYNCHRONOUS THE TIME.
Step 1 Log on to programming mode (see section 3.1). The display shows
Step 2 Enter Function Code 12 then press # and the display shows
*
Your display may not look identical.
Step 3 Enter the HOUR (military format) then press # and enter the MINUTE then
press # the display shows
Step 4 Enter 1 for DAYLIGHT SAVING ZONE or 0 for NON DAYLIGHT SAVING
ZONE (DO NOT PRESS #), the display shows
*
Your display may not look identical.
Step 5 Enter 1 if the date is CORRECT and proceed to step 8
or 0 if it is NOT CORRECT, the display shows
MM= Month, DD= Date, YYYY=Year
D= Day of Week (see table 3.1)
Step 6 Enter the current DATE, YEAR, and DAY OF WEEK (See table 3.1) then
press # the display shows
TABLE 3.1
Step 7 Enter 1 if the date is CORRECT and proceed to step 8
or 0 if it is NOT CORRECT, return to step 5
Step 8 The display shows
Step 9 Select another Function Code to program different field from the table or
press
*
to exit the programming mode.
SELECT PROGRAM
ENTER: _ _ PRESS #
Current Time
ENTER: 12:00
Daylight saving
Time? 1=YES 0=NO
Tue Jan. 01 2002
Correct? 1=Y/ 0=N
Enter today’s
Date: MMDDYYYYD
Wed Jan. 01 2002
Correct? 1=Y/ 0=N
D DAY OF WEEK D DAY OF WEEK
1 MONDAY 5 FRIDAY
2 TUESDAY 6 SATURDAY
3 WEDNESDAY 7 SUNDAY
4 THURSDAY
SELECT PROGRAM
ENTER: _ _ PRESS #