Owner manual

Pach and Company Chapter 3 Page 21

AeGIS NPB9000 Series PROGRAMMING 05/01/02

FUNCTION CODE LOCAL PROGRAMMING

REINITIALIZE TIME ZONE

SCHEDULES

IF 0 is entered the display shows

proceed to step 9

Step 5 Enter 1 for Relay 1 (Door 1) or 2 for Relay 2 (Door 2) then press #, the dis

play shows

Step 6 Enter the DAY OF THE WEEK (1=Mon, 2= Tue, 3= Wed, 4= Thu

5= Fri, 6= Sat, 7= Sun) then press #, the display shows

Step 7 Enter open time HOUR (military format) then press # and enter MINUTE

then press #, the display shows

Step 8 Enter close time HOUR (military format) then press # and enter MINUTE

then press #, the display shows

Step 9 Enter 1 for YES then press # and return to step 2 or 0 for NO then press #

and the display shows

Step 10 Select another Function Code to program different field from the table or

press

to exit the programming mode.

Step 1 Log on to programming mode (see section 3.1). The display shows

Step 2 Enter Function Code 16 then press # and the display shows

Step 3 Press 1 for YES or 0 for NO then press #, the display shows

Step 4 Select another Function Code to program different field from the table or

press

to exit the programming mode.

Enter another

YES = 1 NO = 0

On Which Day (s)?

ENTER: _______

Open Time HH:MM

ENTER: _ _ : _ _

Close Time HH:MM

ENTER: _ _ : _ _

Enter another ?

YES=1 NO=0

SELECT PROGRAM

ENTER: _ _ PRESS #

SELECT PROGRAM

ENTER: _ _ PRESS #

Reinitialize TMZ

1=YES 0=NO

SELECT PROGRAM

ENTER: _ _ PRESS #