Owner manual

Pach and Company Chapter 3 Page 22
AeGIS NPB9000 Series PROGRAMMING 05/01/02
FUNCTION CODE LOCAL PROGRAMMING
17
REINITIALIZE AUTO UNLOCK
SCHEDULES
18
REINITIALIZE HOLIDAY
SCHEDULES
19
REINITIALIZE EVENTS
RECORDING
Step 1 Log on to programming mode (see section 3.1). The display shows
Step 2 Enter Function Code 17 then press # and the display shows
Step 3 Press 1 for YES or 0 for NO then press #, the display shows
Step 4 Select another Function Code to program different field from the table or
press
*
to exit the programming mode.
Step 1 Log on to programming mode (see section 3.1). The display shows
Step 2 Enter Function Code 18 then press # and the display shows
Step 3 Press 1 for YES or 0 for NO then press #, the display show
Step 4 Select another Function Code to program different field from the table or
press
*
to exit the programming mode.
Step 1 Log on to programming mode (see section 3.1). The display shows
Step 2 Enter Function Code 19 then press # and the display shows
Step 3 Press 1 for YES or 0 for NO then press #, the display show
Step 4 Select another Function Code to program different field from the table or
press
*
to exit the programming mode.
SELECT PROGRAM
ENTER: _ _ PRESS #
Reinitialize ATS
1=YES 0=NO
SELECT PROGRAM
ENTER: _ _ PRESS #
SELECT PROGRAM
ENTER: _ _ PRESS #
SELECT PROGRAM
ENTER: _ _ PRESS #
Reinitialize HLD
1=YES 0=NO
SELECT PROGRAM
ENTER: _ _ PRESS #
Reinitialize EVR
1=YES 0=NO
SELECT PROGRAM
ENTER: _ _ PRESS #