INSTALLATION GUIDE Tenino Retro Pot Filler Hi-Rise Kitchen Faucet PB-K05
______________________________________________________________________________
RECOMMENDED TOOLS AND MATERIALS ¨ ¨ ¨ ¨ ¨ ¨ ¨ ¨ ¨ Sink Hole Cover (Optional) Allen Wrench Set Plumbers Putty Adjustable Wrench Tape Measure Basin Wrench Phillips Screwdriver Pencil Masking Tape BEFORE YOU BEGIN There are a variety of things to do before installing any new plumbing system into your home or residence.
INSTALLATION OF THE FAUCET Before starting turn off both the hot and cold water supply lines and remove the old faucet. Clean around all areas of attachment before placing new faucet on sink to help prevent corrosion after installation. Parts List Plastic Lock-nut Cold Water Knob Sink Hole Cover (Not Included - Optional) 1 Hot Water Knob Knob Screws Hot & Cold Water Supply Hoses Secure Faucet Remove both of the plastic lock-nuts provided.
2 Attaching Hot and Cold Water Knobs Attach both the hot and cold water knobs to the desired sides. Using an allen wrench, tighten down the knob screws until the handles are firmly attached. 3 Fastening Hole Cover (Not Included - Optional) If installing on a three-hole sink you may install a faucet hole cover of your choosing.
4 Connect Supplies Connect the hot and cold supply lines to the bottom of the faucet. When connecting, tighten down with a wrench. Plumbers tape may be used to help prevent leaking. Once finished connecting supply lines to the faucet, connect supply lines to the hot and cold water supplies.
5 Flush Lines Remove the aerator. Turn on the hot and cold water supply lines fully to the “on” position. Run the water for one minute to remove any potential debris. During this process watch for any leaks in the pipe. Reinstall the aerator.
Limited Lifetime Warranty Pacific Bay products have been manufactured under the highest standards of quality and workmanship. Pacific Bay warrants to the original purchaser for as long as the original purchaser owns their home that this faucet will be leak- and drip-free during normal use and that all parts and finishes of this faucet will be free from defects in material and manufacturing workmanship.
