Instructions / Assembly

!
!
4 Connect Supplies
Securely attach marked supply lines with corresponding hot and cold tubes from faucet. Tighten
all connections with wrench to ensure that no leaking occurs. With all pipe attachments plumbers
tape can be utilized to help reduce the risk of leaking.
5 Flush Lines
Pull the sprayer down to partially expose the hose. Position the hose in the sink. Tie or tape the
hose to the sink to prevent it from sliding back into the faucet. Remove the sprayer.
Turn on the hot and cold water supply lines. Turn the faucet handle to the cold side and lift the
handle to the “on” position. Run the water for one minute to remove any potential debris. Rotate
handle to the warm side and run for a minute. During this process watch for any water leaks in
the pipe. Reinstall the sprayer.