Owner's manual

Amplifier 1ch100 User manual 1PA100
October 10, 2004 Release: 1.30 2002 by Pacific Laser Equipment
2.2 Power supplies diagram
3. Technical specs
Output voltage: 0V to +150V DC (positive polarity).
Display: Analog voltage indicator.
Analog input: 0 to 5V for 0 to nominal actuator expansion (pre-calibrated).
Power out: 2.5W continuous, 5W peak.
Dimensions: 5 x 3.21 x 1.85”
Power requirements: 120V AC, 100mA.
Enclosure material: Aluminum (Silver or black anodized 3008H-5N)
PLEquipment, 3941 S. Bristol St. Unit E, # 122, Santa Ana, CA. 92704, 800 984-3482, Fax: [phone], [e-mail]
Page 6 of 9