Installation Guide

５

Installation Guide

01. Measure the distance between the two

hooks with the combination template/level,

and mark them.

02. Paste the combination template/level on

the determined wall, keep the level bead

liquid in the middle level to ensure the mirror

is level.

PAGE 1
Installation Guide 01. Measure the distance between the two 02. Paste the combination template/level on hooks with the combination template/level, the determined wall, keep the level bead and mark them. liquid in the middle level to ensure the mirror is level.
PAGE 2
03. Drill holes at the marks with an electric drill. 04. Use a hammer to drive the expansion tube into the hole.
PAGE 3
05. Put the screw into the expansion tube with a Phillips screwdriver until the screw head is 7mm off the wall. 06. Mount the mirror on the wall and ensure it is sturdy.