SDS

Paint Scentsations, LLC., 21021 Heron Way, Suite 106, Lakeville, MN 55044
SAFETY DATA SHEET
Page 4 of 8 #103 Fresh Air Date Issued: 6/16/2015
SECTION 7 - HANDLING & STORAGE
SECTION 6 - ACCIDENTAL RELEASE MEASURES
SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION
Spill/Leak Procedures
Small Spills Contain spills immediately with inert materials ( e.g. sand, earth ) . If material
is spilled in a confined area, ventilate the area well. Keep spectators away.
Floor may be slippery; use care to avoid falling. Transfer liquids and solid diking
material to separate suitable containers for recovery or disposal. CAUTION:
keep spills and cleaning runoff out of municipal sewers and open bodies of
water.
Large Spills Use same procedure as small spill.
Containment For large spills, dike far ahead of liquid spill for later disposal. Do no release
into sewers or waterways.
Handling Precautions Store in a cool, dry place. Do not freeze. Spilled material is slippery.
Wash thoroughly after handling.
Storage Requirements Avoid subjecting this product to extreme temperature variations.
Keep product containers tightly closed when not in use.
Engineering Controls:
Ventilation Good general ventilation should be sufficient.
Administrative Controls:
Respiratory Protection No special protective devices or procedure required.
Contaminated Equipment Launder before reuse.
Protective Clothing/Equipment Wear chemically protective gloves, boots, aprons, and gauntlets to prevent pro-
longed or repeated skin contact is optional. Wear protective eyeglasses or
chemical safety goggles, per OSHA eye and face-protection regulations
( 2 9 CFR 1910.133 ) . Contact lenses are not eye protective devices.
Appropriate eye protection must be worn instead of, or in conjunction with
contact lenses.
Safety Stations: Make emergency eyewash stations, safety/quick-drench showers, and washing
facilities available in work area.