Full Product Manual

IMPORTANT: SELECTING PAINT

• Your Paint Zoom

Platinum unit can be used with a wide variety of paints, stains and coatings

such as deck and fence stains, latex, sealers, varnishes, wood preservatives, enamels, oil-and

water-based paints and automotive paints.

• However, there are some materials that cannot be sprayed, so please check with the recom-

mendation of the manufacturer before buying the paint or other material. If the instructions

refer to brush application only, then the material probably cannot be sprayed.

THIS UNIT CANNOT BE USED FOR TEXTURED PAINTS. USE OF THESE MATERIALS WILL CAUSE

PREMATURE WEAR, WHICH WILL VOID YOUR WARRANTY. TO OBTAIN THE BEST RESULTS

FROM YOUR PAINT ZOOM PLATINUM

™

UNIT, PLEASE READ THE INSTRUCTIONS CAREFULLY.

m HAZARD: HAZARDOUS VAPORS m

PAINTS, SOLVENTS, INSECTICIDES AND OTHER MATERIALS CAN BE HARMFUL IF INHALED

OR COME IN CONTACT WITH THE BODY. VAPORS CAN CAUSE SEVERE NAUSEA, FAINTING OR

POISONING.

PREVENTION:

- Use a respirator or mask. Read all instructions supplied with the

mask to be sure it will provide the necessary protection.

- Wear protective eyewear.

- Wear protective clothing as required by coating manufacturer.

SPECIFICATIONS

Name: Paint Zoom

Platinum

Model Number: PZP3000

Input: 120 volt | 60hz

Power: 950 watts / 7.9 Amps

Cord: 1.5 feet, 2-prong polarized

Paint Container: 900 ml | 30 oz

Hose Length: 5 feet

Nozzle Size: 1.8 mm

Max Paint Flow: 600 ml/min

Spraying Pressure: 0.18-0.24 bar/2.6-3.5 psi

Weight: 2.09 kg

UNIT SET UP

ATTACHING THE AIR HOSE

• Uncoil the air hose and attach one end to the back of the spray gun and the other end to the

Paint Zoom

Platinum unit. Insert the air hose end to the guide at side of device ﬁrmly. (A) Insert

the other side of air hose to the connector of gun side ﬁrmly (B).