operating manual & parts list 9661051C, 9661201C, 9661301C & 9661401C 0.5-Ton, 2-Ton, 3-Ton & 4-Ton Arbor Press with depth stop collar Read carefully and follow all safety rules and operating instructions before first use of this product. 9637077.
Palmgren Operating Manual & Parts List 9661051C, 9661201C, 9661301C & 9661401C R DESCRIPTION Palmgren Arbor Presses are designed for riveting, squeezing, bending, punching, flattening, removing a bearing or pressing in bearings. Removable, rotating, machined anvil has 4-slots to provide convenient support for workpieces that vary in size and shape. Presses are suited for work in production lines as well as in machine shops, automotive repair shops and home workshops. Model 9661051 is a 0.
Palmgren Operating Manual & Parts List 9661051C, 9661201C, 9661301C & 9661401C • Loosen the two set screws slightly with a wrench (not supplied) and slide the Collar over the Ram. Position the Collar at the desired height and tighten both the set screws MAINTENANCE • Oil the pinion periodically through the oil fitting, and grease the ram rack whenever necessary. Keep a light film of oil on machined surface to prevent rust. Keep work area clean. Clean the arbor press of dirt and debris after every use.
Palmgren Operating Manual & Parts List 9661051C, 9661201C, 9661301C & 9661401C 10 12 4 8 9 11 5 1 17 7 16 15 2 6 11 12 3 5 14 15 4 13 Figure 2 - Replacement Parts Illustration for 0.5-Ton, 2-Ton, 3-Ton and 4-Ton Arbor Press REPLACEMENT PARTS LIST FOR ARBOR PRESS Ref. No. Description Part Number for: 9661051C 9661201C 9661301C 9661401C Qty. 1 2 3 4 4 5 6 7 8 9 10 11 11 12 12 13 14 15 15 15 16 17 ∆ ∆ Body Ram with Magnet Pinion 6-1.0 x 16mm Socket Head Bolt 6-1.