Datasheet

Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Conductive Polymer Aluminum Solid Capacitors
fd±0.05
L max.
15 min. 4 min.
19 min.
fD±0.5
F
+
–
Lot. No.
Polarity marking (−)
Series
R. Capacitance
R. Voltage
Radial Lead Type
Series : SXE
●
Super high voltage (100 V.DC max.)
●
RoHS compliance, Halogen free
Features
Size code E12
Category temperature range –55 °C to +105 °C
Rated voltage range 63 V.DC to 100 V.DC
Rated capacitance range 15 µF to 33 µF
Capacitance tolerance ±20 % (120 Hz / + 20 °C)
Leakage current Please see the attached characteristics list
Dissipation factor (tan d) Please see the attached characteristics list
Endurance
+105 °C, 5000 h, rated voltage applied
Capacitance change Within ±20 % of the initial value
tan
d
< 150 % of the initial limit
DC leakage current Within the initial limit
Damp heat
(Steady State)
+60 °C, 90 % to 95 %, 1000 h, No-applied voltage
Capacitance change Within ±20 % of the initial value
tan
d
< 150 % of the initial limit
DC leakage current Within the initial limit (after voltage processing)
Unit : mm
Size code
f
D±0.5 L max. F±0.5
f
d±0.05
E12
8.0 12.0 3.5 0.6
Series
Rated
voltage
(V.DC)
Rated
capacitance
(µF)
Case size (mm)
Size
code
Specifications
Part number
fD
L
Ripple
✽1
current
(mAr.m.s.)
ESR
✽2
(mΩ max.)
tan d
✽3
LC
✽4
(µA)
SXE
63 33 8.0 12.0
E12
2950 25 0.12 104 63SXE33M
100 15 8.0 12.0 2350 40 0.12 75 100SXE15M
✽
1 Ripple current (100 kHz/ +105 °C ),
✽
2 ESR (100 kHz to 300 kHz/+20 °C)
✽
3 tan
d
(120 Hz/+20 °C)
✽
4 After 2 minutes
◆
Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”.
Frequency correction factor for ripple current
Frequency 120 Hz
<
f < 1 kHz 1 kHz
<
f < 10 kHz 10 kHz
<
f < 100 kHz 100 kHz
<
f < 500 kHz
Coeffi cient 0.05 0.3 0.7 1
Speci cations
Dimensions (not to scale) Marking
✽
Externals of fi gure are the reference.
Characteristics list
Nov. 201501