Operating Instructions

100
Chapter 5 Preparation
Connecting the AJ-RC10G Remote Controller
• Some functions can be remote-controlled when the
remote control unit AJ-RC10G (optional accessory) is
connected to the camera.
• When the AJ-RC10G is connected, the camera
automatically enters remote control mode after the power
switches of both the camera and the AJ-RC10G are
turned ON.
REMOTE connector AJ-RC10G
 NOTE
• Be sure to turn the POWER switches on the camera and
the AJ-RC10G off before connecting or disconnecting the
controller cable.
• Use only designated cables or optional cables to connect
the AJ-RC10G. Use of other cables could result in
equipment damage.
• The USER buttons and MENU button do not work when
the AJ-RC10G is connected.
• Refer to the Operating Instructions of the AJ-RC10G
included in the supplied CD-ROM.