Operating Instructions

105
Chapter 6 Manipulating Clips with Thumbnails
Switching the Thumbnail Display
The display can be switched so that only those clips
matching the specified conditions are displayed in the
thumbnail screen.
1
Press the THUMBNAIL button.
• The thumbnail screen appears on the LCD
monitor.
2
Press the THUMBNAIL MENU button.
• The thumbnail menu opens.
a
a THUMBNAIL MENU button
3
Select THUMBNAIL from the thumbnail menu.
• Switch the thumbnail display by selecting one of
the following items:
ALL CLIP:
Display all clips.
SAME FORMAT CLIPS:
Displays clips of the current system
format.
SELECTED CLIPS:
Display randomly selected clips.
MARKED CLIPS:
Display clips with shot marks attached.
TEXT MEMO CLIPS:
Display clips with text memo data
attached.
SLOT CLIPS:
Display clips recorded in the P2 card
inserted in the specified slot. When this
item is selected, “SLOT1” to “SLOT2”
are displayed as a sub-menu. Select the
desired slot to display the clips.
SETUP:
Please refer to [Setting the Thumbnail
Display Mode] (page 115) for information
about this item.
EXIT:
Close the sub-menu.