Operating Instructions

108
Chapter 6 Manipulating Clips with Thumbnails
4
With the pointer located in the lower part, move
the pointer to the desired text memo number
using the cursor right and left buttons (p/o).
Then, press the PLAY/PAUSE button.
• Playback will start from the time code position of
the text memo where the pointer is located.
If the STOP button is pressed during playback
or playback finishes at the end of the clip, the
thumbnail screen appears again with the pointer
located on the text memo where playback started.
• Press the THUMBNAIL MENU button to select
EXIT or press the EXIT button to return the pointer
to the upper part of the thumbnail screen.
 NOTE
• Pressing the REC button in the text memo screen will not
start recording.
• Text memo thumbnails for AVC-Intra format clips that cannot
be played back appear in gray.
Deleting a text memo
1
Select the desired text memo by carrying out
steps 1-3 for [Playing back a clip at the position
where a text memo is recorded] (page 107).
2
Move the pointer to the desired text memo, and
then press the SET button.
3
Press the THUMBNAIL MENU button to select
OPERATION  DELETE from the thumbnail
menu.
• YES and NO appear to confirm deletion. Use the
cursor buttons and the SET button to select YES.
The text memo is deleted.
Using a text memo to break a clip and
copy the necessary portion
1
Select the desired text memo in a clip by
carrying out steps 1-3 for [Playing back a clip
at the position where a text memo is recorded]
(page 107).
2
Move the pointer to the desired text memo, and
then press the SET button.
• You can select more than one text memo.
3
Press the THUMBNAIL MENU button to select
OPERATION  COPY.
4
Use the cursor buttons and the SET button to
select the slot to copy to and select YES.
• Copying starts.
• The portion between the selected text memo and
the next one is copied. If no text memo is found
after the selected memo, then the remainder of the
clip after the selected text memo is copied.
• If multiple text memos are selected, the selected
sections are copied.
• When the clip is being copied, the unit indicates
the progress of the copy process and cancellation
status. To discontinue the copy process, press the
SET button. Then, a YES/NO confirmation screen
is displayed. Use the cursor buttons and SET
button to select YES.
 NOTE
In clip division and copying using the text memo function, the
area copied may be automatically modified depending on the
recording format of the clip.
Deleting Clips
1
Press the THUMBNAIL button.
• The thumbnail screen appears on the LCD
monitor.
2
Use the cursor buttons to move the pointer to
the clip to be deleted and press the SET button
to select the clip.
3
Press the THUMBNAIL MENU button and
select OPERATION  DELETE from the
thumbnail menu.