Operating Instructions

114

Chapter 6 Manipulating Clips with Thumbnails

Setting of Proxy (optional)

Installing the video encoder card (AJ-YAX800G, optional

accessory) in P2 card slot 2 makes it possible to set up the

proxy recording function.

The video encoder card is not recognized when inserted if

the power for the unit is turned on. Insert the video encoder

card after turning off the power for the unit.

Select OPERATION  DEVICE SETUP  PROXY from the

thumbnail menu to specify the setting.

For details on how to install and set up the video encoder

card, refer to the User’s Guide of the video encoder card.

 NOTE

When “PROXY CARD ERROR” is indicated in the viewﬁnder,

either check the video encoder card or set the unit so that

proxy recording is not performed.

Formatting a P2 Card

Press the THUMBNAIL button.

• The thumbnail screen appears on the LCD

monitor.

Press the THUMBNAIL MENU button and

select OPERATION  FORMAT from the

thumbnail menu.

• When the screen shown below appears, select the

slot number of the P2 card you want to format and

press the SET button.

• Select EXIT if formatting is not required.

The following screen appears. Use the cursor

buttons and the SET button to select YES.

• The selected P2 card is formatted.