Operating Instructions

115
Chapter 6 Manipulating Clips with Thumbnails
Formatting SD memory cards
SD memory cards can also be formatted from the
thumbnail screen. With an SD memory card inserted into
the unit, perform the following operation:
1
Press the THUMBNAIL button.
• The thumbnail screen appears on the LCD
monitor.
2
Press the THUMBNAIL MENU button and
select OPERATION  FORMAT from the
thumbnail menu.
• Select “SD CARD” and press the SET button when
the screen shown below appears.
• Select “EXIT” if formatting is not required.
3
The following screen appears. Use the cursor
buttons and the SET button to select YES.
• The SD memory card is formatted.
 NOTE
You can also use the menu option SD CARD FORMAT in the
CARD FUNCTIONS screen to format SD memory cards.
For details, refer to [Formatting, Writing and Reading an SD
memory card] (page 81).
Setting the Thumbnail Display
Mode
The thumbnail display mode can be customized to suit
your preferences.
1
Press the THUMBNAIL button.
• The thumbnail screen appears on the LCD
monitor.
2
Press the THUMBNAIL MENU button and
select THUMBNAIL  SETUP from the
thumbnail menu.
• The following screen appears.
INDICATOR:
Select which indicators you want to show on
thumbnails and which you want to hide.
• ALL HIDE:
ON: No indicators are displayed.
OFF: Indication/No indication will be set
depending on the following menu.
The factory settings are as follows.
• MARKER:
Switches the shot mark marker between
indication and no indication (ON/OFF). The
factory setting is ON (indication).
• TEXT MEMO:
Switches the text memo marker between
indication and no indication (ON/OFF). The
factory setting is ON (indication).
• WIDE:
Switches the wide marker between indication
and no indication (ON/OFF). The factory
setting is ON (indication).
• PROXY:
Switches the proxy marker between
indication and no indication (ON/OFF). The
factory setting is ON (indication).
DATA DISPLAY:
The time display field of the clip offers a choice
of Time Code (TC), User Bits (UB), Shooting
Time (TIME), Shooting Date (DATE), Shooting
Date and Time (DATE/TIME) or USER CLIP
NAME. The factory setting is Time Code.