Operating Instructions

127
Chapter 7 Menu Operations
Item Setting Notes
REC FORMAT (Continued from the previous page)
DVCPRO HD/60P, DVCPRO HD/30PN, DVCPRO
HD/24PN: Uses the DVCPRO HD codec for recording.
Shooting and recording at 60P, 30PN (native
recording) and 24PN (native recording).
(when SYSTEM MODE is 480 – 59.94i)
DVCPRO50/60i, DVCPRO/60i, DV/60i: These use
DVCPRO50, DVCPRO and DV codecs, respectively.
Use CAMERA MODE options to set shooting mode.
Recording is locked at 60i.
• Not available when 1080i or 720P
is set in SYSTEM MODE and REC
SIGNAL is 1394.
• Not available in USB DEVICE mode.
CAMERA MODE Sets the DVCPRO HD codec at 1080-59.94i and a
CAMERA MODE of 480-59.94i.
60i, 30P, 24P, 24PA
• Does not appear when SYSTEM
MODE is set to 720-59.94P.
• Not available in the following
conditions.
- When the REC SIGNAL option is set
to 1394.
- Available only when SYSTEM MODE
is set to 1080-59.94i and REC
FORMAT is set to something other
than DVCPROHD/60i.
SCAN REVERSE Cancels the image inversion that occurs with film
lenses and anamorphic lenses.
ON, OFF
ASPECT CONV Selects the aspect ratio for recording at 480i.
SIDE CROP: Crops the right and left edges of the
image.
LETTER BOX: Adds black bands at the top and
bottom of the image.
SQUEEZE: Compresses the image horizontally.
• Not available when SYSTEM MODE is
set to 1080-59.94i or 720-59.94P.
SETUP Selects the setup level for the 480i video signal.
0%: Setup is switched to 0% for both VIDEO OUT
output and recording.
7.5% A: Setup is switched to 7.5% for VIDEO OUT
output and 0% for recording.
PC MODE SELECT Sets camera operating mode when PC MODE is set to
ON and an external device is connected via USB.
USB HOST: Selects USB 2.0 for connecting an
external hard disk drive. (For details, refer to
page 140.)
USB DEVICE: Makes it possible to connect the
camera to a computer via USB 2.0 to enable use
of a P2 card as mass storage. (For details, refer to
page 139.)
• Not available when PC MODE is set
to ON.
PC MODE Operates the camera according to mode selected
using PC MODE SELECT.
ON: Operates in PC MODE.
OFF: Terminates PC MODE and returns the camera to
normal operation.
• This function is always set to OFF when the power is
turned on.
____ indicates the factory setting