Operating Instructions

24
Chapter 2 Parts and their Functions
Warning and Status Display
Functions
1
2
3 4
1 Back tally lamp
When the BACK TALLY switch is set to ON, this lamp
behaves in the same way as the front tally lamp.
2 Rear tally lamp
When the BACK TALLY switch is set to ON, the rear tally
lamp behaves in the same way as the back tally lamp.
3 BACK TALLY switch
Use this switch to control the back and rear tally lamps.
ON: Enables the back and rear tally lamps.
OFF: Disables the back and rear tally lamps.
4 WARNING lamp
This lamp starts blinking or lights when an error is
detected in the memory card recorder unit.
LCD Monitor
21
1 LCD Monitor
The LCD monitor displays the video in the viewfinder.
Alternatively, it can show clips on the P2 card in a
thumbnail format.
For details on the LCD monitor, refer to [Viewfinder and
LCD Menus] (page 120).
In thumbnail display mode, you can use the thumbnail
menu buttons, CURSOR and SET buttons to manipulate
or delete clips, or format P2 cards.
For details, refer to [Manipulating Clips with
Thumbnails] (page 101).
2 OPEN button
Use to open the LCD monitor.