Operating Instructions

28
Chapter 3 Recording and Playback
P2 Cards
Inserting P2 Cards
 NOTE
When using the camera recorder for the first time, be sure to
set the time data beforehand.
For details, refer to [Setting Date and Time of Internal Clock]
(page 26).
1
Turn on the POWER switch.
2
Open the card slot cover.
Slot cover
3
Insert a P2 card in a P2 card slot.
• Press in the card until the eject button pops up.
Insert the card with the
logo facing up.
EJECT button
4
Push the eject button that pops up to the right.
• Insert a P2 card into the AG-HPX300P. The P2
CARD ACCESS LED for the appropriate slot
indicates the status of the P2 card.
For details, refer to [P2 CARD ACCESS LED and
status of P2 cards] (page 29).
P2 CARD ACCESS LED
5
Close the card slot cover.
 NOTE
• To prevent cards from falling out, dust from entering and
reduce the risk of exposure to static electricity, close the card
slot cover before moving the camera.
• Format P2 cards only on a P2 card device.
Removing P2 Cards
1
Open the card slot cover.
2
Raise the eject button.
3
Then depress the eject button to release the P2
card.
Raise the eject button. Press the raised eject
button to remove a P2
card.