Operating Instructions
34
Chapter 3 Recording and Playback
3
Point the camera at your subject to adjust the
focus, and zoom.
4
To use the electronic shutter, set the shutter
speed and shutter mode.
For more information, see [Setting the Electronic
Shutter] (page 52).
5
Press the REC button to start recording.
6
To stop recording, press the REC button.
NOTE
• Shooting the sun and other very bright subjects may produce
a color cast in surrounding areas.
Operation Buttons
During recording, all operation buttons (REW, FF, PLAY/PAUSE,
STOP) are disabled.
Normal Recording
• Pressing the REC button starts recording of video and
sound on the P2 card.
• The video and audio (including additional information)
recorded in one session is referred to as a clip.
REC button
NOTE
Pressing the REC button will not immediately stop data write
operations to a P2 card in the following situations. And the
REC button operation is not recognized.
• When terminating a short recording
• When terminating a recording that has just continued onto a
second P2 card