Operating Instructions

55
Chapter 4 Adjustments and Settings for Recording
When operating the AG-HPX300P without a sound
recordist, it is recommended that the FRONT AUDIO LEVEL
control should be used to adjust the audio level.
In advance, check the level meter in the viewfinder screen
and use the FRONT AUDIO LEVEL control to adjust the
appropriate audio channel to prevent input of excessive
audio signals.
Selecting Function for the FRONT
AUDIO LEVEL Control
Use the menu options FRONT VR CH1 and FRONT VR
CH2 in the AUDIO SETUP screen to determine whether or
not the FRONT AUDIO LEVEL control should be enabled.
Selecting an input signal in the menu will enable FRONT
AUDIO LEVEL control operations for that input signal.
• When the FRONT AUDIO LEVEL control is set to level 10,
it controls AUDIO LEVEL CH1 and CH2.
PUSH MENU TO RETURN
FRONT VR CH2
MIC LOWCUT CH1
MIC LOWCUT CH2
MIC LOWCUT CH3
MIC LOWCUT CH4
LIMITER CH1
OFF
OFF
OFF
OFF
OFF
LIMITER CH2 OFF
OFF
OFF
FRONT VR CH1
AUDIO SETUP
CH3 and CH4 Recording Levels
Conditions and input levels set in the menu options AUTO
LEVEL CH3 and the AUTO LEVEL CH4 in the AUDIO
SETUP screen change the operation of the audio level of
channels 3 and 4 as shown below. These functions cannot
be manually adjusted.
Each option can be selected in the AUDIO SETUP screen.
AUTO LEVEL
CH3/CH4
Input level
LINE MIC
ON AGC
*
ON AGC ON
OFF AGC/LIMITER OFF LIMITER ON
* AGC: Audio Gain Control