Operating Instructions

Chapter 5 Preparation

When using a V-mount type battery

Mount the V-mount adapter plate. Insert the plate and slide

it as shown below.

• To remove the plate, slide the release lever downwards.

Release lever

Setting the battery type

• Select the battery type listed under BATTERY SELECT.

Select the menu option BATTERY SELECT from the

setting menu BATTERY SETUP screen.

• When using a battery not listed under BATTERY SELECT:

If it is a NiCD battery, select “NiCd14(14V)” and set each

item according to the battery characteristics. If it is not a

NiCd battery, select TYPE A or TYPE B and set each item

according to the battery characteristics. For details, refer

to [BATTERY SETUP screen] (page 134).

 NOTE

• For information about the V-mount adapter plate, please

contact the store where you purchased the camera-recorder.

• With the V-mount adapter plate installed, % (percent) values

cannot be displayed when using batteries that show the

remaining battery capacity.