Operating Instructions

94
Chapter 5 Preparation
 NOTE
• The camera can load up to 8 files.
When an attempt is made to load a new file while 8 files have
already been loaded, “READ NG CAC FILE FULL” appears. To
load a new file, delete an existing file before loading the new
file.
For details, see [Deleting CAC File] (page 96).
• “READ NG FORMAT ERROR” indicates the file cannot be
used and will not be loaded. Make sure the file is in a format
the camera supports and that the file on the SD card is not
corrupted.
Deleting CAC File
1
Open the LENS SETUP screen.
For details on menu operation, refer to [Using the
menus] (page 120).
2
Use the JOG dial button to select CAC FILE
DELETE, select EXECUTE and press the JOG
dial.
PUSH MENU TO RETURN
SHADING(USER)
CAC
CAC PROPERTY
CAC CARD READ
CAC FILE DELETE
CAC FILE INIT
DEFAULT
>>>
ON
>>>
>>>
IRIS ADJUST >>>
RETURN
EXECUTE
SHADING SELECT
LENS SETUP
3
Use the JOG dial to select the CAC file to be
deleted. Then select YES and press the JOG
dial button.
“-----” is indicated when deletion ends.
PUSH MENU TO RETURN
1:XT17X4.5BRM-K14
CAC FILE DELETE
2:
3:
4:
5:
6:
7:
8:
NO
YES
CAC FILE NO:1 DELETE?
CAC FILE DELETE
PUSH SET
Initializing CAC File (Returning Data to
Their Factory Defaults)
1
Open the LENS SETUP screen.
For details on menu operation, refer to [Using the
menus] (page 120).
2
Use the JOG dial button to select CAC
FILE INIT. Then select YES to display the
confirmation screen.
PUSH MENU TO RETURN
SHADING(USER)
CAC
CAC PROPERTY
CAC CARD READ
CAC FILE DELETE
CAC FILE INIT
DEFAULT
>>>
ON
>>>
>>>
IRIS ADJUST EXECUTE
>>>
RETURN
SHADING SELECT
LENS SETUP
3
Select YES in the confirmation screen and
press the JOG dial button.
• CAC FILE INIT  PROCESSING  COMPLETED
(these three appear in succession) to indicate that
initialization has been completed.
• The LENS SET UP screen appears after
completion.
NO
YES
CAC FILE INITIAL?
CAC FILE INIT
PUSH SET
 NOTE
This operation deletes all files loaded into the camera and
returns the four CAC data files to their factory defaults.