Operating Instructions

96
Chapter 5 Preparation
2
Set the AUDIO IN switch to W.L. for the audio
channels that will be recorded.
AUDIO IN Switch
• Set the menu option WIRELESS TYPE in the
AUDIO SETUP screen to DUAL for a 2-channel
wireless receiver.
When Using Audio Devices
1
Connect the audio device to the AUDIO IN jack
with the XLR cable.
2
Set the AUDIO IN switch to [REAR] for the
channel to which the XLR cable is connected.
3
Set the LINE/MIC/+48V selector switch on the
rear panel to [LINE].
AUDIO IN Switch
AUDIO IN Jack
LINE/MIC/+48V Selector Switch