Operating Instructions

97
Chapter 5 Preparation
Attaching Accessories
Mounting the Camera on a Tripod
Use an optional (SHAN-TM700) tripod adapter to place the
camera on a tripod.
1
Attach the tripod adapter to the tripod.
Pan head
Tripod adapter
 NOTE
Use the holes in the tripod adapter that will make
it possible to position the camera over the tripod
adapter’s center of gravity.
Also, make sure that the diameter of the selected hole
matches the diameter of the pan head screw.
2
Attach the camera to the tripod adapter.
• Slide the camera forward along the grooves until
you hear a “click”.
Removing the Camera from the Tripod
Adapter
While holding the red lever down, move the black lever in
the direction of the arrow, and slide the camera backward
to remove it.
Red Lever Black Lever
 NOTE
If the tripod adapter’s pin does not return to its original
position after the camera has been removed, hold the red lever
down and move the black lever in the direction of the arrow
again, in order to return the pin to its original position.
Please note that the camera cannot be mounted if the pin
remains in the center.
Attaching the Shoulder Strap
Attach the shoulder strap to the shoulder strap bracket.
To detach the shoulder strap, first open the hooks, then
detach the strap.
Press to open the
hook.
Shoulder Strap
 NOTE
Make sure that the shoulder strap is securely attached.