Operating Instructions

ManualsBrandsPanasonic ManualsCamcordersAG-HPX500E

100

Mounting and Adjusting the Lens

Chapter 5 Preparation

Use the JOG dial button to select

DEFAULT, USER1, USER2, USER3 or

OFF and press the JOG dial button.

• To adjust the white shading, select USER1,

USER2 or USER3.

• The USER1, USER2 or USER3 settings do

not contain any compensation data by default.

• Store compensation data that suits

KJ16ex7.7B IRSD PS12 and KJ16ex7.7B

KRSD PS12 in DEFAULT. For lenses other

than those above, perform the “White

Shading Adjustment” described below.

PUSH MENU TO RETURN

SHADING(USER)

SHADING SELECT

LENS SETUP

DEFAULT

CAC PROPERTY

CAC CARD READ

CAC FILE DELETE

CAC FILE INIT

IRIS ADJUST

OFF

USER1

USER2

USER3

OFF

White Shading Adjustment

<Note>

Coloring may occur in the vertical direction near the

open setting of the lens iris even when the white shading

has been adjusted. This is an optical characteristic and

not indicative of a failure.

Place the camera in the adjustment

mode.

(1) Mount a lens on the camera.

• Do not forget to connect the lens cable.

(2) Turn off the electronic shutter and set the

gain to L (0 dB).

(3) If the lens comes with an extender,

disengage it.

(4) Open the setting menu LENS SETUP

screen and select USER1, USER2 or

USER3 under SHADING SELECT.

(5) Use the JOG dial button to select

SHADING (USER), select YES and press

the JOG dial button.

• The message “CHECK LUMINANCE

LEVEL ZEBRA ON VF” appears.