Digital Camera / VTR Operating Instructions AJ-D610WA

–88–
Setup Card Operations
Setup Card Data Operations
Operations to store setting data on setup cards and read out stored data are performed at the
“CARD READ/WRITE” SUB menu page of MAIN menu screen 2 of 4.
|Note{
When operating the unit with a remote controller, the CARD READ/WRITE page cannot be oper-
ated from the unit.
Formatting setup cards
1 Set the MENU SET/OFF switch to the SET position while the SHIFT/ITEM button and UP
button are held down together.
2 Press the PAGE button to display the MAIN menu screen 3 of 4.
3 Press the SHIFT/ITEM button to move the cursor to the “CARD READ/WRITE” position.
4 Press the UP or DOWN button to open the CARD READ/WRITE page.
5 Press the SHIFT/ITEM button repeatedly to move the cursor to the CARD CONFIG. position.
6 A menu shown below appears when the UP (or DOWN) button is pressed.
7 Press the UP button to format the set up card. When the setup card has been formatted, the
message shown below appears.
|Note{
When setup cards are formatted, the setting conditions at that time are also input simulta-
neously.
8 When menu operations have been completed, return the MENU SET/OFF switch to OFF.
The setting menu disappears from the viewfinder screen and the displays indicating the unit’s
current status appear at the top and bottom of the viewfinder screen.
{
CARD
CARD
READ
READ
/ W RITE
ONCFIG?
(
Y
:
UP . N
:
W RITE
READ
DO
W N
)
SELECT
SELECT
1
1
CONF I G
USER DATA
|
¢
{
CARD
CARD
READ
READ
/ W RITE
W RITE
READ
SELECT
SELECT
1
1
CON
OK
FIG
U
ORFMAT
SER DATA
|
¢
{
CARD
CARD
READ
READ
/ W RITE
W RITE
READ
SELECT
SELECT
1
1
CONF I G
USER DATA
¢ |