Datasheet

Power PhotoMOS (AQZ10PD, 20PD)
1
ds_x615_en_aqz10d_20d: 181206J
TYPES
1. AC/DC type
2. DC type
Notes: Load voltage and current of AC/DC type: Peak AC/DC.
Load voltage and current of DC type: DC.
RATING
1. AC/DC type
1) Absolute maximum ratings (Ambient temperature: 25°C 77°F)
A voltage-sensitive
PhotoMOS relay.
DC load type is available.
Power PhotoMOS
(AQZ10 P D, 20 P D)
Output rating
Part No.
Packing quantity
Load voltage Load current Inner carton Outer carton
60 V 2.7 A AQZ202D
25 pcs. 500 pcs.
100 V 1.8 A AQZ205D
200 V 0.9 A AQZ207D
400 V 0.45 A AQZ204D
Output rating
Part No.
Packing quantity
Load voltage Load current Inner carton Outer carton
60 V 3.6 A AQZ102D
25 pcs. 500 pcs.
100 V 2.3 A AQZ105D
200 V 1.1 A AQZ107D
400 V 0.6 A AQZ104D
Item Symbol AQZ202D AQZ205D AQZ207D AQZ204D Remarks
Input
Input voltage V
IN 30 V
Input reverse voltage V
RIN 5 V
Power dissipation P
in 300 mW
Output
Load voltage (Peak AC) V
L 60 V 100 V 200 V 400 V
Continuous load current (Peak AC) I
L 2.7 A 1.8 A 0.9 A 0.45 A
Peak load current I
peak 9.0 A 6.0 A 3.0 A 1.5 A 100 ms (1 shot), VL = DC
Power dissipation P
out 1.6 W
Total power dissipation P
T 1.6 W
I/O isolation voltage V
iso 2,500 V AC
Temperature
limits
Operating T
opr
–40°C to +85°C –40°F to +185°F (4 V ≤ VIN ≤ 6 V)
–40°C to +75°C –40°F to +167°F (6 V < V
IN ≤ 15 V)
–40°C to +60°C –40°F to +140°F (15 V < V
IN ≤ 30 V)
Non-condensing at low
temperatures
Storage T
stg –40°C to +100°C –40°F to +212°F
21
3.5
12.5
.827
.138
.492
mm inch
AC/DC type DC type
–+
12 3 4
––++
12 3 4
FEATURES
1. A voltage sensitive power
PhotoMOS relay
Conventional power PhotoMOS relays
are connected externally to an input
limiting resistor in order to obtain the
appropriate LED current. Adding an
internal constant-current element renders
the input limiting resistor unnecessary,
making it possible for the PhotoMOS
relay to be voltage driven.
2. Wide range of input voltages
Allows a wide range of input voltages
from 4 to 30 V DC. The relay can be used
in 5 V, 12 V or 24 V DC systems.
3. Large capacity PhotoMOS relay
Supports the various types of load
control, from very small loads to a
maximum 2.7 A for the AC/DC dual type,
3.6 A for the DC-only type.
4. Both AC/DC dual types and DC-only
types are available
The AC/DC dual type is capable of bi-
directional control, and unlike
conventional SSRs, does not have to be
used differently depending on the load.
The DC-only type is well suited for control
of DC solenoids and DC motors.
5. High sensitivity, low ON resistance
A maximum 3.6 A load can be controlled
with the minimum input voltage of 4 V
DC. The ON resistance is also low at
0.09 Ω (AQZ102D).
6. Small scale, slim type, 4-pin SIL
Length 21.0 mm×width 3.5 mm×height
12.5 mm. High precision mounting is
possible because of the small 73.5mm
2
area of the 4-pin SIL.