AC Adapter AW-PS300 Before attempting to connect or operate this product, please read these instructions completely.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. SA 1965 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. For U.S.
CONTENTS FEATURES ................................................................................................................................................................................... 1 PRECAUTIONS ............................................................................................................................................................................. 2 MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ...............................................................................
PRECAUTIONS • Care Pull out the power cable plug, and wipe the control panel clean with a dry cloth. If it is extremely dirty, dip a cloth into a diluted solution of kitchen detergent, squeeze it hard, and wipe the product surfaces carefully. • Handle the adaptor with care. Dropping the control panel or subjecting it to a strong shock can cause a failure or an accident.
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ■ FRONT PANEL FUSE(POWER) O I POWER FUSE OFF FUSE(LAMP) ON FUSE POWER FUSE T 125V 3.15A q Power Switch (POWER, ON/OFF) Power is switched on to supply power to the pan/tilt head when this switch is pressed to the ON position (POWER Indicator lights), and is switched off when the switch is pressed to the OFF position. FUSE T 125V 6.3A AC Adaptor AW-PS300 e Fuse [FUSE (POWER)] Power fuse. Use a 125V, 3.15A fuse to replace it.
■ FRONT PANEL LAMP AC OUT AC IN OPTION SW OPTION SW CONTROL OUT CONTROL IN OP LAMP CONTROL C S DC 15V OUT + − 100V 500W t AC 120V Inlet [AC IN](AC 3P Inlet) Connect the supplied AC cable. y to short or open, using a cable (to be locally purchased) with a nominal cross section of 0.3 mm2 or more that meets the UL specifications. The maximum allowable cable length is 30 meters. Applicable Wire Solid wire: ø1.02 (AWG 18) Stranded wire: 0.75 mm2 Usable wire range Solid wire: ø0.64 to ø1.
i Lamp Control Input Terminals (LAMP CONTROL C/S) (2P Terminal Board) Connect it to LAMP CONTROL C/S Terminals on the pan/tilt head when controlling the halogen lamp connected to LAMP AC OUT Connector !0 to switch it on and off, using a cable (to be locally purchased) with a nominal cross section of 0.3 mm2 or more that meets the UL specifications. The maximum allowable cable length is 30 meters. Applicable wire Solid wire: ø1.29 (AWG 16) Stranded wire: 1.25 mm2 (AWG 16) Usable wire range Solid wire: ø0.
CONNECTION • Switch off all the devices before making any connection. • Use the Pan/tilt Head AW-PH300. • Connect the DC 15V OUT Terminals [+] and [–] on this adapter to the DC 15V IN Terminals [+] and [–] on the Pan/tilt Head (AW-PH300) respectively with cables (to be locally purchased) with a nominal cross section of 1.25 mm2 or more that meets the UL specifications. The maximum allowable cable length between the adapter and pan/tilt head is 30 meters. Applicable (usable) wire Solid wire: ø1.
• For a detailed description of connecting the individual devices, refer to their Operating Instructions. • Connect the supplied AC cable to the AC 120V inlet. Plug the AC cable to an AC outlet, and press the power switch on the adapter to the ON position. Pan/tilt Head AW-PH300 Lamp Control Cable (Nominal cross section 0.3 mm2 or more, to be locally purchased) * Unnecessary if lamp control is not needed. Halogen Lamp DC cable (Nominal cross section 1.
SPECIFICATIONS Source Voltage: Input Capacity: Power Output: Pan/tilt head connecting cables: Maximum cable length Operating temperature: Dimensions: Weight: Finish: 120 V AC 60 Hz 552W DC 15V OUT: DC15V 2.5A, with over-current protect circuit LAMP AC OUT: 120V AC, max. 500W, min.
Broadcast & Television Systems Company Division of Matsushita Electric Corporation of America Executive Office: One Panasonic Way 2E-6, Secaucus, NJ 07094 Regional Offices: EASTERN ZONE: 43 Hartz Way, Secaucus, NJ 07094 (201) 348-7620 CENTRAL ZONE: 1707 North Randall Road, Elgin, IL 60123 (847) 468-5200 SOUTHERN ZONE: Atlanta Region: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30174 Panazip 11 (770) 338-6841, fax (770) 338-6741 Law Enforcement Video Products: 1225 Northbrook Parkway, Suite 1-160, Suwa