Operating Instructions

16
Setting the USER buttons
Menu items can be assigned to the two USER buttons
(USER1, USER2).
After assigning an item, the assigned menu item can be
displayed simply by pressing one of these USER buttons
(USER1 or USER2).
POWER ALARM F1 CAMERA
OSD
R/B GAIN R/B PED
SYSTEMSETUPCAMERA
SCENE/MODE
DETAIL
DELETESTORE
PAGEMENU F2 EXIT
USER2USER1
PRESET MEMORY / MENU
GAIN/PED
F2
F1
123
AWB/ABB
4
SHUTTER
5
678910
Menu item Details of operation performed
SWLINK This enables the link between the unit and
switcher.
BUSCONT This is the bus switching setting.
FASIST This sets the focus assist function.
CAMSEL This displays icons at the bottom left of the
images from the remote camera selected by the
unit on the multi view display of the switcher.
TALLY This sends the tally information sent periodically
by UDP from the switcher to the remote camera.
CAMINF This sends the camera information of the remote
camera selected to the switcher.
AWB AWB is executed when the USER button, in which
AWB has been assigned, is pressed.
When AWB is executed successfully, the indicator
of the button goes off; conversely, when it is not
executed successfully, it blinks.
ABB ABB is executed when the USER button, in which
AWB has been assigned, is pressed.
When ABB is executed successfully, the indicator
of the button goes off; conversely, when it is not
executed successfully, it blinks.
POWER OFF When the USER button in which POWER OFF
has been assigned is pressed, the indicator of
the button lights for an instant, and power OFF is
requested for all the remote cameras connected.
w Registering functions in the
USER buttons
1 Set the MENU button to ON.
Press the MENU button to light its indicator.
2 Set the PRESET MEMORY/MENU 9 button
(SETUP) to ON.
When the button is pressed and its indicator lights, the
[SETUP] menu is displayed on the LCD panel.
[1]USER ▼
3 Press the F1 dial.
4 Turn the F1 dial to display [USER1] or [USER2].
1.USER1 ▼
SWLINK
5 Turn the F2 dial to select the item to be
assigned, and press the F2 dial.
1.USER1 ▼
SWLINK
1.USER1 ▼
BUSCONT
Turn the F2 dial, and then press
it.