Operating Instructions

20
Setting the functions
qSwitching from focus control to iris
control or vice versa
It is possible to switch the control, which is implemented by
dial and button operations, from focus control to iris control
(or vice versa).
AUTOIRIS
AUTO
HILOW
PTZ/FOCUS SPEED P
A
FOCUS/PUSH OAF
TELE
ZOOM
WIDE
CAMERA STATUS / SELECTION
12345
From the [SETUP] menu, select [OPERATE] and display
[FOCUS/IRIS]. Then select either “NORMAL” or “REVERSE”.
7.FOCUS/IRIS
NORMAL
When “REVERSE” is selected as the setting, focus control
and iris control are switched.
When “NORMAL” is selected, the original control is restored.
qSetting the PAN/TILT lever inclination
and speed
The correlation between angle and operating speed when
the PAN/TILT lever is inclined can be adjusted.
From the [SETUP] menu, select [OPERATE] and display
[P/T CURV]. Then set the correlation between the lever
angle and its operating speed.
8.P/T CURV ▲
1
Change the correlation between the angle and operating
speed when the PAN/TILT lever is inclined.
Operating speed
Inclination of lever