Operating Instructions

26
Setting the functions
w Adjusting the minimum pan/tilt
start speed
The minimum speed at which the pan-tilt head is to start
moving is automatically adjusted to ensure that the remote
camera will start moving smoothly in line with the inclination
of the PAN/TILT lever when manually operating the pan-tilt
head using the joystick.
This adjustment enables the play in the PAN/TILT lever to be
reduced.
From the [SETUP] menu, select [PTZ ADJ] and display [P/T
MIN SPEED].Then press the F2 dial.
1.P/T MIN SPEED▼
START
When the automatic adjustment is completed, the indicators
of both the PRESET MEMORY/MENU 9 button (SETUP)
and the corresponding CAMERA STATUS/SELECTION
button of the camera go off.
w Adjusting the minimum lens
zoom start speed
This adjustment ensures that the lens zoom will start moving
smoothly in line with the inclination of the ZOOM button
when operating the lens zoom using the ZOOM button.
From the [SETUP] menu, select [PTZ ADJ] and display [Z
MIN SPEED]. Then turn the F2 dial to set the compensation
amount.
2.Z MIN SPEED
0
The lowest compensation amount is “1”, and the highest is
“8”.
No compensation is provided at the “0” setting.
While observing the images on a monitor, move the ZOOM
button slowly, and check whether the lens zoom starts
moving smoothly.