Operating Instructions

Linking the unit with the switcher

This setting is used to link the unit with an optional switcher

(AW-HS50).

w Switcher network settings

1 Set the MENU button to ON.

Press the MENU button to light its indicator.

2 Set PRESET MEMORY/MENU 10 button

(SYSTEM) to ON.

When the button is pressed and its indicator is lighted,

the [SYSTEM] menu is displayed on the LCD panel.

[1]CAMERA CTL ▼

3 Turn the F1 dial, display the SW IP ADR menu,

and press the F1 dial.

[7]SW IP ADR

1.IP:SW

192 168.000.020

Press the F1 dial.

4 Turn the F2 dial, select the IP address, and then

press the F2 dial to enter the selection.

Set the IP address which has been set in the switcher.

1.IP:SW

192 168.000.020

1.IP:SW

172.168 000.020

Turn the F2 dial, and then press

it.

Input the IP address in four blocks of numerals. When

input advances to the last block and the F2 dial is

pressed, the IP address is entered.

1.IP:SW

172.168.000.030