Operating Instructions

46
Button Menu item Control device Initial value Setting
9 SETUP PTZ ADJ P/T MIN SPEED START
Z MIN SPEED 0 to
LIMIT UP AW-HE50 Off Off, On
AW-HE100 EXEC EXEC
AW-PH360, AW-PH400,
AW-PH405, AW-PH650
EXEC EXEC
LIMIT DOWN AW-HE50 Off Off, On
AW-HE100 EXEC EXEC
AW-PH360, AW-PH400,
AW-PH405, AW-PH650
EXEC EXEC
LIMIT LEFT AW-HE50 Off Off, On
AW-HE100 EXEC EXEC
AW-PH360, AW-PH400,
AW-PH405, AW-PH650
EXEC EXEC
LIMIT RIGHT AW-HE50 Off Off, On
AW-HE100 EXEC EXEC
AW-PH360, AW-PH400,
AW-PH405, AW-PH650
EXEC EXEC
GPI EMERGENCY MD1 1 to 100
EMERGENCY MD2 1 to 100
EMERGENCY MD3 1 to 100
LCD BL BACKLIGHT On Off, On
MENU CTL MENU CONTROL DISABLE ENABLE, DISABLE
10 SYSTEM CAMERA CTL CAM1 to 100 NoAsign Serial, Network, NoAsign
CAM ASSIGN CAM1 to 100 192.168.000.020
SW ASSIGN INPUT1 CAM1 to 100
INPUT2 CAM1 to 100
INPUT3 CAM1 to 100
INPUT4 CAM1 to 100
INPUT5 CAM1 to 100
AUTO SET IP AUTO SETUP RENEW RENEW, KEEP, ALL CLEAR
NETWORK IP ADDRESS
192.168.000.009
SUBNETMASK 255.255.255.000
GATEWAY 000.000.000.000
MAC ADDRESS
Display only
CAM IP ADR IP:CAM1 to 100
192.168.000.020
SW IP ADR IP:SW 192.168.000.030
ALARM POWER ALARM, NO ALARM
CAM
@@@
(Note)
FAN ALM, P/T ERR,
FAN ALM+P/T ERR
CAM
@@@
(Note)
FAN ALM, P/T ERR,
FAN ALM+P/T ERR
CAM
@@@
(Note)
FAN ALM, P/T ERR,
FAN ALM+P/T ERR
CAM
@@@
(Note)
FAN ALM, P/T ERR,
FAN ALM+P/T ERR
CAM
@@@
(Note)
FAN ALM, P/T ERR,
FAN ALM+P/T ERR
INITIALIZE INITIALIZE ALL, SETUP
VERSION SYSTEM VER V
@@
.
@@
.
@@
PROGRAM VER V
@@
.
@@
.
@@
FPGA VER V
@@
.
@@
.
@@
Note: “@@@” is the number of the camera in the selected group of cameras.
Table of menu items