Operating Instructions

5
Setting and operating the preset memories
This unit has a preset memory function for registering the
preset data of the shooting positions and settings of the
remote cameras.
Up to 100 sets of data (presets) can be registered in these
memories.
w Registering data in the preset
memories
1 Press one of the CAMERA STATUS/
SELECTION buttons 1 to 5 to select the remote
camera to be operated.
2 Output the images to be shot by the camera to
the monitor.
The camera angle to be registered is determined by
operating the PAN/TILT lever and ZOOM button.
If necessary, adjust the focus and iris as well.
3 Press the STORE button.
4 After pressing the PAGE button, press the
PRESET MEMORY/MENU button to specify the
page number to be registered.
In this step, the number of the page to be registered as
the preset memory is specified.
5 Hold down the PRESET MEMORY/MENU
button of the number on the page.
In this case, specify the number on the page which was
specified in step
4 .
R/B GAIN R/B PED
SYSTEMSETUPCAMERA
SCENE/MODE
DETAIL
DELETESTORE
PAGEMENU F2 EXIT
USER2USER1
PT ACTIVEAUTOIRIS
CAMERA STATUS / SELECTION
PRESET MEMORY / MENU
GAIN/PED
123
AWB/ABB
4
SHUTTER
5
12345
678910
1
4, 5
43
When specifying the number on the page, it is registered
by holding down the PRESET MEMORY/MENU button.
Note
To register more data, repeat steps 2 to 5 .
p When specifying a different “number on the page” on the
same “page number,” it is registered by skipping step
4
and carrying out the operation in step
5 only.
Preset numbers and registered pages
Preset No. Page No. Number on the page
1 to 10 1 1 to 10
11 to 20 2 1 to 10
21 to 30 3 1 to 10
31 to 40 4 1 to 10
41 to 50 5 1 to 10
51 to 60 6 1 to 10
61 to 70 7 1 to 10
71 to 80 8 1 to 10
81 to 90 9 1 to 10
91 to 100 10 1 to 10
 Memo 
Example: When specifying preset 21
Press the following buttons in the order given: PAGE
button  PRESET MEMORY/MENU 3 button  PRESET
MEMORY/MENU button 1.