Operating Instructions
11
Parts and their functions
w Control panel
POWER ALARM F1 CAMERA
OSD
R/B GAIN R/B PED
SYSTEMSETUPCAMERA
SCENE/MODE
DETAIL
DELETESTORE
PAGEMENU F2 EXIT
USER2USER1
PT ACTIVEAUTOIRIS
AUTO
HILOW
PTZ/FOCUS SPEED PAN/TILTFOCUS/PUSH OAF
TELE
ZOOM
WIDE
CAMERA STATUS / SELECTION
PRESET MEMORY / MENU
GAIN/PED
F2
F1
123
AWB/ABB
4
SHUTTER
5
12345
678910
POWER indicator [POWER]
This indicator lights when the POWER switch () on the
rear panel is set to ON while power is supplied to the DC
IN socket.
ALARM indicator [ALARM]
This indicator lights when there is a problem with the
power supply (voltage drop).
It also lights when an alarm (a cooling fan alarm or pan/
tilt error) has been received from a remote camera.
The alarm information can be output to an external
device from the unit’s TALLY/GPI connector ().
For details, refer to “Checking the equipment alarm
information” (<Operations and Settings> Instructions).
When the alarm indicator has lighted, stop using the
unit immediately, and be absolutely sure to contact your
dealer.
Continuing to use the unit even after an alarm has
occurred may cause the unit to malfunction.
LCD panel
The current setting statuses are displayed on this panel.
F1 dial, F2 dial
These dials are turned to change the menu values, and
they are pressed to enter the changes that have been
made.
The F1 dial is used to operate the items displayed at the
top of the LCD panel, and the F2 dial is used to operate
the items displayed underneath.
What appears on the on-screen displays of the remote
cameras and how operations are performed differ
depending on the camera type.
For details, refer to “Operating the menu items of the
selected remote camera” (<Operations and Settings>
Instructions).