Operating Instructions

6
Setting and operating the preset memories
w Executing the preset data
1 Press one of the CAMERA STATUS/SELECTION
buttons 1 to 5 to select the remote camera to
be operated.
Select the remote camera which is to be pointed at the
camera angle registered in the preset memory.
2 Press the PRESET MEMORY/MENU button,
and specify the registered page number and
number on the page.
Take this step while the MENU button and PAGE button
are in the OFF status.
To follow this operation with the execution of a preset
on another page, specify the preset number by pressing
the following buttons in the order given: PAGE button
 PRESET MEMORY/MENU button  PRESET
MEMORY/MENU button.
When a preset operation has been carried out, the indicator
of the specified PRESET MEMORY/MENU button lights.
R/B GAIN R/B PED
SYSTEMSETUPCAMERA
SCENE/MODE
DETAIL
DELETESTORE
PAGEMENU F2 EXIT
USER2USER1
PT ACTIVEAUTOIRIS
CAMERA STATUS / SELECTION
PRESET MEMORY / MENU
GAIN/PED
123
AWB/ABB
4
SHUTTER
5
12345
678910
1
2
w Deleting the preset memory
data
1 Press the DELETE button.
2 After pressing the PAGE button, press the
PRESET MEMORY/MENU button to specify the
page number of the preset memory data to be
deleted.
In this step, specify the number of the page to be
deleted.
3 Hold down the PRESET MEMORY/MENU
button for the number on the page.
For this step, specify the number on the page which was
specified in
2 .
The preset memory data is deleted by holding down
the PRESET MEMORY/MENU button specifying the
number on the page.
R/B GAIN R/B PED
SYSTEMSETUPCAMERA
SCENE/MODE
DETAIL
DELETESTORE
PAGEMENU F2 EXIT
USER2USER1
PRESET MEMORY / MENU
GAIN/PED
123
AWB/ABB
4
SHUTTER
5
678910
1
2, 3
2