Operating Instructions

17
Network settings
Select the settings for the network of the remote cameras
connected to the unit.
w Setting the unit
The unit’s settings are established using the [SYSTEM]
menu.
Set the IP address, subnet mask and default gateway.
First, the basic menu operations will be described.
1 Set the MENU button to ON.
Press the MENU button, and light its indicator.
2 Set the PRESET MEMORY/MENU 10 button
(SYSTEM) to ON.
When the button is pressed and its indicator is lighted,
the [SYSTEM] menu is displayed on the LCD panel.
[1]CAMERA CTL ▼
3 Turn the F1 dial, and display the [NETWORK]
menu.
[5]NETWORK
4 Press the F1 dial.
1.IP ADDRESS ▼
192 168.000.009
5 Turn the F1 dial, and display the target setting
item.
2.SUBNETMASK
255 255.255.000
1.IP ADDRESS ▼
192 168.000.009
3.GATEWAY
000 000.000.000
4.MAC ADDRESS ▲
- - - -
6 Turn the F2 dial, and select the setting.
2.SUBNETMASK
255 255.255.000
7 Press the F2 dial, and change the setting.
2.SUBNETMASK
255.255 255.000
Input all the settings except for the MAC address in four
blocks of numerals.
When input advances to the last block and the F2 dial is
pressed, the IP address is entered.
2.SUBNETMASK
255.255.255.000
p The MAC address is merely displayed—it cannot be
changed.
In order for the settings to take effect, the unit must
be restarted.
Turn off the unit’s power, and then turn it back on
again.
Note