Operating Instructions

18
Network settings
Setting the IP address
On the [SYSTEM] menu, select the [NETWORK] menu, and
display [IP ADDRESS].
Then operate the F2 dial to set the IP address.
Select a setting which will not duplicate the IP setting of
another device.
1.IP ADDRESS ▼
192 168.000.009
In order for the setting to take effect, the unit must be
restarted.
Turn off the unit’s power, and then turn it back on
again.
Note
Setting the subnet mask
On the [SYSTEM] menu, select the [NETWORK] menu, and
display [SUBNETMASK].
Then operate the F2 dial to set the subnet mask.
2.SUBNETMASK
255 255.255.000
In order for the setting to take effect, the unit must be
restarted.
Turn off the unit’s power, and then turn it back on
again.
Note
Setting the default gateway
On the [SYSTEM] menu, select the [NETWORK] menu, and
display [GATEWAY].
Then operate the F2 dial to set the gateway.
3.GATEWAY
000 000.000.000
p A “000.000.000.000” setting for [GATEWAY] means “no
default gateway”.
In order for the setting to take effect, the unit must be
restarted.
Turn off the unit’s power, and then turn it back on
again.
Note
Setting the MAC address
On the [SYSTEM] menu, select the [NETWORK] menu, and
display [MAC ADDRESS].
4.MAC ADDRESS ▲
- - - -