Operation Manual

17
Connections
Connect the camera to your router and to the power outlet as described below.
• Before proceeding, confirm that your PC is connected to your router and can access the Internet.
Also confirm that your router’s UPnP™ feature is enabled. (Most routers have UPnP™ turned off
by default.)
* Use a LAN cable that is no more than 30 m (98 feet 5 inches) long to connect the camera and the power transfer unit.
LAN cable
Router
Power transfer unit
AC adaptor
Outside
Inside
Wall
Outdoor LAN cable
To the power outlet
(For BL-C140CE/
BL-C140E/
BL-C160CE/
BL-C160E
use an AC cord)
*