Datasheet

CB
2
ds_61202_0000_en_cb: 200407D
Characteristics
Remarks
TYPICAL APPLICATIONS
ORDERING INFORMATION
TYPES
1. Standard type
* Regarding solder, this product is not MIL (Military Standard) compliant. Please evaluate solder mounting by the actual equipment before using.
Max. operating speed (at rated load) 15 cpm
Initial insulation resistance*
2
Min. 20 MΩ (at 500 V DC)
Initial breakdown voltage*
3
Between open contacts 500 Vrms for 1 min.
Between contacts and coil 500 Vrms for 1 min.
Operate time*
4
(at nominal voltage) Max. 15 ms (Initial)
Release time (without diode)*
4
(at nominal voltage) Max. 15 ms (Initial)
Shock resistance
Functional Min. 200 m/s
2
{20 G}
Destructive Min. 1,000 m/s
2
{100 G}
Vibration resistance
Functional 10 Hz to 500 Hz, Min. 44.1m/s
2
{4.5G}
Functional*
5
10 Hz to 2,000 Hz, Min. 44.1m/s
2
{4.5G}
Conditions for operation, transport and storage*
6
(Not freezing and condensing at low temperature)
Ambient temp.
–40°C to +85°C –40°F to +185°F
(Heat resistant type: –40°C to +125°C –40°F to +257°F)
Humidity 5% R.H. to 85% R.H.
Mass Approx. 33 g 1.16 oz
Contact arrangement Mounting classification Coil voltage, V DC
Part No.
Sealed type Flux-resistant type
1 Form A
PC board type
12V CB1a-P-12V CB1aF-P-12V
24V CB1a-P-24V CB1aF-P-24V
Plug-in type
12V CB1a-12V CB1aF-12V
24V CB1a-24V CB1aF-24V
Bracket type
12V CB1a-M-12V CB1aF-M-12V
24V CB1a-M-24V CB1aF-M-24V
1 Form C
PC board type
12V CB1-P-12V CB1F-P-12V
24V CB1-P-24V CB1F-P-24V
Plug-in type
12V CB1-12V CB1F-12V
24V CB1-24V CB1F-24V
Bracket type
12V CB1-M-12V CB1F-M-12V
24V CB1-M-24V CB1F-M-24V
High contact capacity (1 Form A)
PC board type*
12V CB1aH-P-12V CB1aHF-P-12V
24V CB1aH-P-24V CB1aHF-P-24V
Plug-in type
12V CB1aH-12V CB1aHF-12V
24V CB1aH-24V CB1aHF-24V
Bracket type
12V CB1aH-M-12V CB1aHF-M-12V
24V CB1aH-M-24V CB1aHF-M-24V
*
1
At nominal switching capacity, operating frequency: 2s ON, 2s OFF
*
2
Measurement at same location as “Initial breakdown voltage” section
*
3
Detection current: 10 mA
*
4
Excluding contact bounce time
*
5
Time of vibration for each direction; X, Y, Z direction: 4 hours
*
6
Refer to 6. Conditions for operation, transport and storage mentioned in
AMBIENT ENVIRONMENT (p. 19, Relay Technical Information).
X
Y
Z
• Head lights
• Starters
• ABS
• Head Lamp
• Air conditioner
• Tracter, Combine
1 F T M 12 VCB
Contact arrangement Protective construction Mounting classification Coil voltage (DC)
1a: 1 Form A
1: 1 Form C
1aH: High contact capacity
(1 Form A)
Nil: Sealed type
F: Flux-resistant type
Heat resistant of types
Nil: Standard type
T: Heat resistant type
D: Diode
R: Resistor
Nil: Plug-in type
P: PC board type
M: Bracket type
12, 24 V
Note: Bulk package: 50 pcs.; Case: 200 pcs.