OPERATING INSTRUCTIONS Personal Computer Model No. CF-19 series Useful Information On-screen Manual .................................................... 16 Handling and Maintenance ....................................... 17 Hard Disk Backup Function (Recover Pro) .............. 19 Hard Disk Data Erase Utility ..................................... 21 Reinstalling Software ................................................ 22 Troubleshooting Error Code/Message ................................................
Introduction Thank you for purchasing this Panasonic computer. For optimum performance and safety, please read these instruc tions carefully. Terms and illustrations in these instructions : : Enter : Fn + F5 : [start] - [Run] : : CAUTION NOTE : Conditions that may result in minor or moderate injury. Useful and helpful information. Press [Enter] key. Press and hold [Fn] key, and then press [F5] key. Click [start], and then click [Run]. You may need to double-click in some cases.
Read Me First Models for U.S.A. This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the fre quency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite systems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands.
Read Me First Getting Started 9.
33-Ca-1 Industry Canada This product complies with RSS210 Industry Canada. Operation is subject to the following two conditions; (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Read Me First Important Safety Instructions / Importantes Mesures De Sécurité Getting Started When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm.
Precautions *1 AIRCRAFT COCKPIT EQUIPMENT/SYSTEMS include Class2 Electrical Flight Bag (EFB) Systems and Class1 EFB Systems when used during critical phases of flight (e.g., during take-off and landing) and/or mounted on to the aircraft. Class1 EFB Systems and 2 EFB Systems are defined by FAA: AC (Advisory Circular) 120-76A or JAA: JAA TGL (Temporary Guidance Leaflets) No.36. Panasonic cannot guarantee any specifications, technolo gies, reliability, safety (e.g.
Read Me First Getting Started Do Not Turn the Volume Up to Loud When Using Headphones Listening at high volumes that overstimulate the ear for long periods of time may result in loss of hearing. Use the Modem with a Regular Telephone Line Connection to an internal phone line (on-premise switches) of a company or business office, etc. or to a digital public phone or use in a country or area not supported by the computer may result in a fire or electric shocks.
For Used in Motor Vehicle /Pour L’utilisation Dans Un Véhicule Motorisé Avertissement : L’ordinateur bloc-notes peut être installé dans un véhicule motorisé et dans le champ de vision du conducteur uniquement en tant que dispositif d’aide aux fonctions du véhicule, comme par exemple pour fournir des informations sur le véhicule, comme dispositif de contrôle de système, pour l’observation à l’arrière ou sur les côtés du véhicule, ainsi que pour fournir de l’informa tion routière.
Getting Started Description of Parts A: Wireless LAN Antenna Reference Manual “Wireless LAN” Î B: Bluetooth Antenna Reference Manual “Bluetooth” Î C: Stylus/Pen Holder D: Touch Pad E: LED Indicator : Wireless ready This indicator lights when Wireless LAN, Bluetooth, and/or Wireless WAN are connected and ready. It does not necessarily indicate the On/Off condition of the wireless connection.
Left side Bottom A: DC-IN Jack B: USB Port Reference Manual “USB Devices” Î C: IEEE 1394 Interface Connector Reference Manual “IEEE 1394 Devices” Î L: Microphone Jack A condenser microphone can be used. If other types of microphones are used, audio input may not be possible, or malfunctions may occur as a result.
Description of Parts Switching to the Tablet mode A Lift up the display so it stands perpendicular to the body. B Slide and hold the display release latch (A), and rotate the display clockwise until it clicks. Getting Started C Close as the display faces up and fix it using the latch (B). Attaching the stylus to the computer Use the tether to attach the stylus to the computer so you will not lose it. There are holes (A) to attach it.
First-time Operation Preparation A Check and identify the supplied accessories. If you do not find the described accessories, contact Panasonic Technical Support (Î page 36). • AC Adaptor. . . . . 1 • AC Cord . . . . . . . 1 • Battery Pack . . . 1 • Modem Telephone Cable . . . 1 • Tether . . . . . . . . . 1 Model No: CF-VZSU48 • Shoulder strap . . 1 • Soft Cloth . . . . . . 1 • Operating Instructions (This book) . . . 1 • Product Recovery DVD-ROM . . . . . . . . 1 • Windows® Book . . . . . . . . . .
First-time Operation 2 Connect your computer to a power outlet. The battery charging starts automatically. CAUTION Getting Started z Do not disconnect the AC adaptor and do not switch the wireless switch to on until the first-time operation procedure is completed. When using the computer for the first time, do not connect any peripheral device z except the battery pack and AC adaptor. z Handling the AC adaptor y Problems such as sudden voltage drops may arise during periods of thunder and lightning.
5 Create a new account. A Click [start] - [Control Panel] - [User Accounts] - [Create a new account]. CAUTION z Remember your password. If you forget the password, you cannot use the Windows operation system. Creating a password reset disk beforehand is recommended. Perform the touchscreen calibration. A Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen Calibration Utility].
On-screen Manual You can access the Reference Manual and the Important Tips on the computer screen. When you access the Reference Manual and the Important Tips for the first time, the License Agreement of the Adobe Reader may be displayed. Read it carefully and select [Accept] to proceed. Reference Manual The Reference Manual contains the practical information to help you fully enjoy the computer’s performance. To access the Reference Manual: A Click [start] - [Reference Manual].
Handling and Maintenance Operation environment Place the computer on a flat stable surface. Do not place the computer upright or turn it over. If the computer is exposed to an extremely strong impact, it may become inoperable.
Handling and Maintenance Preventing your computer from unauthorized use via wireless LAN Before using wireless LAN, make the appropriate security settings such as data encryption. Computrace® Software Computrace® software tracks your stolen computer. Perform the following steps before installing Computrace® software. Computrace® software is not included or installed in this computer.
Hard Disk Backup Function (Recover Pro) The Recover Pro creates a backup area (storage area) on the hard disk to back up (store) the hard disk data, and restores the backup data to its original location when it is lost or corrupted by operational errors or other factors. You do not need external media or peripheral devices to back up or restore hard disk data on this computer. At purchase, the Recover Pro is not installed. Install using the instructions below.
Hard Disk Backup Function (Recover Pro) CAUTION z During the installation, the screen may become black (no display) momentarily. This is not a malfunction. z If you select [Typical] in installation, approximately 40% (max.) of the hard disk drive space is allocated as the back up area. z You cannot change the size of backup area after creation. Complete Backup Backs up all data on the hard disk. Preparation z Connect the AC adaptor. 1 Log on to Windows as an administrator. 2 Close all programs.
Hard Disk Data Erase Utility When disposing the computer or transferring the ownership, erase all hard disk data in order to avoid data leakage. Even if you erase the data or initialize the hard disk using normal Windows commands, the data can be read with some special software. Use the hard disk data erase utility to erase the data completely. Note that transferring of the ownership without uninstalling the commercial software will be a violation of the software’s license agreement.
Reinstalling Software Reinstalling software will return the computer to the default condition. When you reinstall the software, the hard disk data including the backup data of the Recover Pro will be erased. Back up important data to other media or an external hard disk before reinstallation.
12 Turn on the computer, and press F2 several times while [Panasonic] boot screen is dis played. The Setup Utility starts up. If the password is requested, enter the Supervisor Password. 13 Press F9. At the confirmation message, select [Yes] and then press Enter. The Setup Utility settings excluding the password(s) will return to the default values. 14 Select the [Exit] menu and then select [Save Current Values], then press Enter . At the confirmation message, select [Yes] and press Enter.
Error Code/Message Follow the instructions below when an error message or code appears. If the problem persists or if the error code/mes sage is not shown here, contact Panasonic Technical Support ( page 36). Error Code/Message 0211 Keyboard error Solution Disconnect external keyboard or mouse. 0251 System CMOS checksum bad Default configuration used An error has occurred in the memory of Setup Utility settings. This occurs when the memory content is changed by an unexpected program operation, etc.
Troubleshooting (Basic) Follow the instructions below when a problem has occurred. There is also an advanced troubleshooting guide in the “Reference Manual”. For a software problem, refer to the software’s instruction manual. If the problem persists, contact Panasonic Technical Support ( page 36). You can also check the computer’s status in the PC Information Viewer Reference Manual “Troubleshooting (Advanced)”). ( Starting Up Connect the AC adaptor. Insert a fully charged battery.
Troubleshooting (Basic) Starting Up Cannot resume. z An error may occur when the computer automatically enters the standby or hibernation mode while the screensaver is active. In this case, turn off the screensaver or change the pattern of the screensaver. Other startup problems. Press F9 in the Setup Utility ( page 24 “To start the Setup Utility”) to return the Setup Utility settings (excluding the passwords) to the default values. Start the Setup Utility and make the settings again.
Display Image colors are not reproduced as expected when displaying photographs or other images. Remove the check mark of [Intel(R) Display Power Saving Technology]. A Click [start] - [Control Panel] - [Other Control Panel Options] - [Intel(R) GMA Driver for Mobile]. B Click [Display Settings] - [Power Settings]. The screen is disordered. Changing the number of display colors and resolution may affect the screen. Restart the computer. Connecting/disconnecting an external display may affect the screen.
Troubleshooting (Basic) Recover Pro Cannot install Recover Pro Recover Pro cannot be installed when four primary partitions exist. Reduce the number of primary partitions to three or less before installation. You can check the number of the primary partitions in the order of [start] - [Control Panel] - [Performance and Maintenance] - [Administrative Tools] - [Computer Management] - [Disk Management]. Recover Pro cannot be installed when a backup area is remaining on the hard disk.
Hardware Diagnostics If it appears that the hardware installed in this computer is not operating properly, you can use the PC-Diagnostic Utility to determine whether or not there is a problem. If the utility discovers a problem in the hardware, contact Panasonic Technical Support. Hardware that can be checked using the PC-Diagnostic Utility Troubleshooting Software cannot be checked using this utility.
Hardware Diagnostics z We recommend that you use the touch pad for operations. When not using the touch pad, you can operate using the internal keyboard instead. Do not use the touchscreen or the digitizer. Operations Touch pad operations Internal keyboard operations Select icon Place the cursor above the icon Press Space .
6 When all the hardware has been checked, confirm the diagnostic check results. If the display is red and the message “Check Result TEST FAILED” is displayed, you can assume that there is a problem with the computer’s hardware. Confirm which hardware component is displayed as red, and contact Panasonic Technical Support. If the display is green and the message “Check Result TEST PASSED” is displayed, the computer’s hardware is operating normally. Continue using the computer as is.
LIMITED USE LICENSE AGREEMENT THE SOFTWARE PROGRAM(S) (“PROGRAMS”) FURNISHED WITH THIS PANASONIC® PRODUCT (“PROD UCT”) ARE LICENSED ONLY TO THE END-USER (“YOU”), AND MAY BE USED BY YOU ONLY IN ACCORDANCE WITH THE LICENSE TERMS DESCRIBED BELOW. YOUR USE OF THE PROGRAMS SHALL BE CONCLUSIVELY DEEMED TO CONSTITUTE YOUR ACCEPTANCE OF THE TERMS OF THIS LICENSE. Matsushita Electric Industrial Co., Ltd. (“MEI”) has developed or otherwise obtained the Programs and hereby licenses their use to you.
Contrat de licence d’usage limité Le(s) logiciel(s) (les “Logiciels”) fournis avec ce produit Panasonic® (le “Produit”) sont exclusivement concédés en licence à l’utilisateur ultime (“vous”), et ils ne peuvent être utilisés que conformément aux clauses contractuelles cides sous. En utilisant les logiciels, vous vous engagez de manière définitive à respecter les termes, clauses et conditions des présentes. Matsushita Electric Industrial Co., Ltd.
Specifications This page provides the specifications for the basic model CF-19CHBAXBM/CF-19CDBAXVM. The model number is different according to the unit configuration. z To check the model number: Check the bottom of the computer or the box the computer came in at the time of purchase. z To check CPU speed, memory size and the hard disk drive (HDD) size: Run the Setup Utility (Î Reference Manual “Setup Utility”) and select [Information] menu.
Main Specifications Operating System Microsoft® Windows® XP Professional Service Microsoft® Windows® XP Tablet PC Edition Pack 2 with Advanced Security Technologies 2005 (NTFS File System) (NTFS File System) Utility Programs DMI Viewer, Microsoft® Windows® Media Player 10, Adobe Reader, PC Information Viewer, SD Utility, Icon Enlarger, Loupe Utility, Intel® Matrix Storage Manager, Intel® PROSet/Wireless Software*7, Bluetooth™ Stack for Windows® by TOSHIBA*8 , Wireless Switch Utility, Hotkey Settings, B
LIMITED WARRANTY For U.S.A. PANASONIC PERSONAL COMPUTER AND PERIPHERALS LIMITED WARRANTY Panasonic Computer Solutions Company (referred to as “Panasonic”) will repair this product (other than software, which is covered by a separate warranty) with new or rebuilt parts, free of charge in the U.S.A. for three (3) years from the date of original purchase in the event of a defect in materials or workmanship.
For Canada PANASONIC COMPUTER AND PERIPHERALS LIMITED WARRANTY Coverage – Panasonic Canada Inc. (“PCI”) warrants to you, the first end user customer, this computer product (excluding software media), when purchased from PCI or from a PCI authorized reseller, to be free from defects in materials and workmanship under normal use, subject to the terms set forth below, during the period of warranty coverage specified.
MEMO 38
As an ENERGY STAR® Partner, Matsushita Electric Industrial Co., Ltd. has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. Outline of the International ENERGY STAR® Office Equipment Program The international ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment.