Operating instructions

CQ-C5355N
34
CQ-C5355N
35
English
No playback or disc
ejected
The disc is inserted upside down.
 Insert a disc correctly.
There is a fl aw or foreign material on the disc.
 Remove the foreign material, or use a fl awless disc.
Sound skipping or
noise
There is a fl aw or foreign material on the disc.
 Remove the foreign material, or use a fl awless disc.
Sound skipping due to
vibration
The unit is not suffi ciently secured.
 Secure the unit to the console box.
The unit is tilted at over 30˚ in the front-to-end direction.
 Make the angle 30˚ or less.
Disc unejectable
Something such as a peeled label obstructs the disc coming out.
 Consult your dealer.
The microcontroller in the unit operates abnormally due to noise or other factors.
 Unplug the power cord and plug it again. In case the unit is still out of
order, consult your dealer.
Troubleshooting
CD
Troubleshooting
Problem Possible cause  Possible solution
PS does not appear
even if an RDS station
is tuned in to.
(“NO PS” appears.)
A PS code cannot be received for the reason of bad receiving conditions, etc.
 A PS code appears if it is received. Wait for a while until conditions
change.
Receiving programs
differs from PTY that
was already set up.
When the station changed between programs, the unit could not receive the PTY
code.
 An appropriate programme is searched for and tuned in to after receiving a
corresponding PTY code. Therefore, wait for a while.
“NONE” appears when
selecting PTY.
Any specifi ed PTY programs cannot be received. There is no desired programme
being broadcast in your area.
 Select another PTY, or wait until a desired programme starts.
The clock time (CT) is
not accurate.
The unit received a station broadcasting time that is not appropriate for you, or
the unit is receiving a station that does not broadcast time.
 Receive a station broadcasting time that is appropriate for your area, or
adjust CT manually.
An AF station cannot
be received even if AF
indicator lights.
There is little difference in receiving conditions between the current station and
AF stations. Update of the AF list ended in failure.
 Wait until the AF list is successfully updated. For unstable reception, tune
in to a stable station by the hand.
RDS
Problem Possible cause  Possible solution
No playback or disc
ejected
The disc has unplayable formatted data.
 Refer to the description about MP3/WMA for playable sound data except
CD-DA (i.e. music CD).
The CD-R/RWs that
are playable on
other devices are not
playable on this unit.
The playability of some CD-R/RWs may depend on the combination of media,
recording software and recorder to be used even if these CD-R/RWs are playable
on other devices such as a PC.
 Make CD-R/RWs in different combination of media, recording software and
recorder after referring to the description about MP3/WMA.
Sound skipping or
noise
There is a fl aw or foreign material on the disc.
 Remove the foreign material, or use a fl awless disc. For MP3/WMA, refer
to the description about MP3/WMA.
Playing VBR (Variable Bit Rate) fi les may cause sound skipping.
 Play Non-VBR fi les.
MP3/WMA
Music is not played
back even if the USB
device is connected.
The USB device and USB extension cable are not connected correctly.
 Connect the USB device and USB extension cable correctly.
There is no music stored in a format that can be played on this unit.
 Check if there is any music data that can be played stored on the USB
device.
The fi le system of the USB device is not compatible with this unit.
 Use a USB device with a FAT12/16/32 fi le system.
The current consumption of the USB device exceeds 500 mA.
 Use a USB device with a current consumption lower than 500 mA.
“READING” is
displayed but music is
not played back.
A USB Hub is connected.
 Do not use a USB Hub.
A number of recorded folders/fi les.
 When there are a number of recorded folders/fi les, it may take a long time
to read all of the fi les.
USB (MP3/WMA)