Operating instructions

CQ-C5355N
36
CQ-C5355N
37
English
Display
Possible cause
 Possible solution
The disc is dirty or upside down.
 Check the disc.
The disc has scratches.
 Check the disc.
(After 5 seconds)
No operation by some cause.
 Unplug the power cord and plug it in again. In case the unit is still out of
order, consult your dealer. (
 Installation Instructions)
(After 5 seconds)
To next fi le automatically
The player for some reason cannot read the fi le you are trying to play. (File
recorded in an unsupported fi le system, compression scheme, data format, fi le
name extension, damaged data, etc.)
 Select a fi le that the player can read. Check the type of data recorded on
the disc. Create a new disc if necessary.
(After 5 seconds)
To next fi le automatically
A WMA fi le can be copyrighted.
 The fi le protected by copyright is not playable.
Note: Refer to the System Upgrade Guidebook for error messages regarding optional products.
Display Possible cause  Possible solution
A USB device is not connected or the connected device cannot be recognized.
 Use the type of USB memory that is suitable for this unit.
No playable fi les exist.
An unsupported USB device was connected.
 Use the type of USB memory that is suitable for this unit.
 Record fi les that can be played back on this unit onto the USB memory.
A USB device that exceeds the current capacity that can be supplied was
connected.
For some reason, an over-current was detected.
 Use a USB memory that has a consumption current of less than 500 mA.
 Switch the Source, and select USB (MP3/WMA) mode again. (When the
USB connector section lights blue color, it is normal.)
 Check that the USB connector section is not dirty, and that there is no
foreign material.
No operation by some cause.
 Switch the power or ACC ON/OFF. If this does not solve the problem, unplug
the power cord and plug it in again. In case the unit is still out of order,
consult your dealer. (
 Installation Instructions)
(After 5 seconds)
To next fi le automatically
The player for some reason cannot read the fi le you are trying to play. (File
recorded in an unsupported fi le system, compression scheme, data format, fi le
name extension, damaged data, etc.)
 Confi rm that the USB extension cable is fi rmly connected, and reconnect if
not. Select a fi le that the player can read. Check the type of data stored in
the USB memory. Format the USB memory if necessary.
(After 5 seconds)
To next fi le automatically
A WMA fi le can be copyrighted.
 The fi le protected by copyright is not playable.
Troubleshooting, Error Display Messages
Display Possible cause  Possible solution
No response to
pressing buttons
The battery is inserted in the wrong direction. A wrong battery is inserted.
 Insert a correct battery in the correct direction.
The battery is weak.
 Replace the battery with new one.
The aiming direction of the remote control unit is wrong.
 Aim the remote control unit at the sensor of the unit and press buttons.
The sensor is exposed to direct sunlight. (The remote control unit may not be
operable when the sensor is exposed to direct sunlight. In such a case, the
system is not faulty.)
 Block off sunlight to the sensor.
Remote control unitCD/MP3/WMA
Troubleshooting Error Display Messages
Error Display Messages
USB (MP3/WMA)