Owner's manual
For Seek Tuning, RDS Station Preset, Tuning in a RDS preset station, and Auto RDS
Station Preset, please refer to Radio Basics (page 16 to 18).
RDS seek tuning (PI seek)
The PI seek function may be used if an RDS station selected from the
memory is poor in receiving condition. Press the preset button again
for the station now tuned in to.
Press an'.’
PEG ON REB OFF
Changing Display
Press D(DISP/CT) to change the display.
(Frequency display continues for only 3 seconds, returning to PS dis
play after that.)
PS display
-------------
Frequency display-
4
CT display
4
__________
- (3 seconds)
PI Seek: If Best Station Research fails in selecting the best station,
the PI seek function operates to automatically tune in to the
same program.
Region (REG) Switching
Press and hold AF(REG) for more than 2 seconds in AF mode to
alternately select REG ON and REG OFF.
Note:
If you wish to stay with the same program, keep REG ON. If you keep
REG OFF, there is a higher possibility of returning in to an AF station
in better receiving condition.
The relationship of the Pi seek function with REG ON and REG OFF
is as described above.
Clock Time (CT) System
The CT (24-hour) system may not properly operate in areas where
RDS CT service is not available. Once CT service is received, the CT
system keeps operating. “NO CT” is displayed in areas where no CT
service is available.
38aa^"-rr'gw-;»'-g- g-
Clock Display
Press D (DISP/CT) to indicate the clock display.
CQ-DFX555/DFX355LEN
21