Owner's manual

Installation continued
Installation Procedures
1. Secure the Mounting Collar ®.
Insert Mounting Collar (T) into the car’s dashboard, and bend mounting tabs out with a screwdriver.
Screwdriver
2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt (D, using a suitable wrench.
c) Insert the unit into Mounting Collar ® and push it in until “click” is heard.
Lock Lever
Make sure that the
lock lever is flush
with the mounting
collar (not projecting
outward).
d) Secure the rear of the unit to the car by either of the two recommended methods.
■ Using the Rear Support Strap (Optional)
Affix one end of the Rear Support Strap to the rear of the unit, and the other end to the Fire Wall of
Car, or some other metallic area.
■ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Cover Mounting Bolt (D on the rear of the unit with Rubber Cushion, and mount it into the existing
Rear Support Bracket.
Fire Wall of Car
Rear Support Bracket
(existing on the car)
CQ-DFX555/DFX355LEN
37