Operating Instructions - Language - English part 2
11
POWER
ECONOMY
POWERFUL
SLEEP
TIMER
PREPARATION BEFORE OPERATION
! Warning /
■ Ensure the power plug is securely inserted.
A loose plug may cause a fire or an electric shock.
■
5
Insert the air filters
4
Insert the air purifying filters
1 Connect the power supply
cord to an independent
power supply
3 Remove the air filters
2 Open the front panel
6
Close the front panel
■ Notes
• If the unit is not going to be used for an extended period of time, turn off the Power switch. If it is left at the ON
position, approximately 2.5 W of electricity will be used even if the indoor unit has been turned off with the remote
control.
• If operation is stopped, then restarted immediately, the unit will resume operation only after 3 minutes.
•
•
● Indoor Unit
DBT: Dry Bulb Temp
WBT: Wet Bulb Temp
Maximum Temperature
Minimum Temperature
DBT WBT DBT WBT DBT WBT DBT WBT
32 23 43 26 30 – 24 18
16 11 16 11 16 – -5 -6
Use under the following conditions
(Unit in °C)
Indoor Outdoor Indoor Outdoor
Cooling / Heating /