Operating Instructions

ManualsBrandsPanasonic ManualsFor HomeCSE9GFEW

CANCEL

OFF

TIMER

SPEED

FAN

AUTO

HEAT

DRY

COOL

OFF

TIMER

OFF

CLOCK RESET

SET

TEMP

AIR SWING

OFF/ON

QUIET

AUTO

MANUAL

CHECK

CANCEL

TIMER

123

OFF

CLOCK RESET

SET

CHECK

OFF/ON

TEMP

Maximum distances : 8m

• In heat mode, it takes a while for the unit to warm up. The

power indicator blinks during this operation.

HOW TO OPERATE

REMOTE CONTROL TRANSMITTER

AUTO MODE - FOR YOUR CONVENIENCE

HEAT MODE - TO ENJOY WARM AIR

• Make sure it is not obstructed.

• Certain ﬂ uorescent lights may interfere with signal transmission.

Please consult your nearest dealer.

Insert AAA or

R03 batteries

Pull out

Inserting the batteries

• The batteries can be used for approximately 1 year.

Replace the batteries when the remote control display or

transmission signal becomes weak.

Setting the current time

Select Turn on Adjust

temperature

Set time

Conﬁ rm

Press

REMOTE CONTROL PREPARATION

MODE OPERATION

AUTO HEAT

DRY COOL

INDICATOR

• Unit selects the operation mode according to temperature

setting, outdoor and room temperature.

• Operation mode is reselected every 30 minutes. During

initial operation mode selection, the power indicator blinks.

COOL MODE - TO ENJOY COOL AIR

• During soft dry operation, the indoor fan operates at low

fan speed to give a very gentle cooling operation.

● The range of temperature for selection is 16°C ~ 30°C.

●

Operating the unit within the recommended

temperature could induce energy saving.

HEAT MODE : 20°C ~ 24°C.

COOL MODE : 26°C ~ 28°C.

DRY MODE : 1°C ~ 2°C lower than room temperature.

DRY MODE - TO DEHUMIDIFY THE

ENVIRONMENT

Remote

control

display

Notes:

• Press

button to restore the remote control’s default

setting.

• While using remote control, please be aware of the OFF

indication on the remote control display to prevent the unit

from starting / stopping improperly.

(Green)

(Orange) (Orange)

(Orange)(Orange)