F565101 Operating Instructions Air Conditioner CS-XE9EKE CS-XE12EKE ENGLISH ESPAÑOL ITALIANO NEDERLANDS PORTUGUÊS EΛΛΗΝΙΚΆ БЪЛГАРСКИ CU-XE9EKE CU-XE12EKE Before operating the unit, read these operating instructions thoroughly and keep them for future reference. Antes de utilizar la unidad, sírvase leer atentamente estas instrucciones de funcionamiento y conservarlas como futuro elemento de consulta.
Thank you for purchasing Panasonic Air Conditioner SAFETY PRECAUTIONS ■ Definition To prevent personal injury, injury to others, or property damage, please observe the following. Incorrect operation due to failure to follow instructions may cause harm or damage, the seriousness of which is classified as below: Warning During Installation • • Do not install, remove and reinstall the unit by yourself; improper installation will cause leakage, electric shock or fire.
The appliance is not intended for use by young children or the infirm person without supervision. Young children should be supervised to ensure that they do not play with the appliance. Environmental Requirements ■ Operation Condition Use this air conditioner under the following temperature range. Temperature (°C) COOLING Battery disposal The batteries must be recycled or disposed of properly.
PRODUCT OVERVIEW ■ About Auto OFF/ON Button • To operate the unit if the remote control is misplaced or malfunctioning. Step Action Mode 1 Press once. Automatic 2 Press and hold until you hear one beep, then release. Force cooling 3 Repeat step 2. Press and hold until you hear two beeps, then release. Normal cooling Repeat step 3. Press and hold until you hear three beeps, then release.
PRODUCT OVERVIEW ■ About Transmitter 1. Pull out the cover. 2. Insert AAA or LR03 batteries. Temperature setting 3. Close the cover. 4. Press CLOCK. 5. Press to set time. LCD display Off/On Cooling, Auto, Heating, Dry mode 6. Press to confirm. Powerful operation Ventilation operation Quiet operation • Timer operation will be based on current time set. • The batteries can be used for approximately 1 year. Remote Control Signal Airflow direction adjustment • Make sure it is not obstructed.
■ About INTRO TO FILTER CLEANING Filter cleaning Filter cleaning function helps to: • Clean the filters automatically on a regular basis. • Avoid airflow blockage caused by dusty filter. • Prevent growth of mold inside the unit. • Improve heating/cooling effect that saves energy consumption.
AUTO FILTER CLEANING ■ About • Filter cleaning in progress will be cancelled if: - Certain button on the remote control are pressed. - The air conditioner main unit’s movable front panel is lifted up. g Auto Filter Cleanin - There is a power failure. Filter Cleaning Indicator AUTO • Filter cleaning will run automatically after the air conditioner operation stops (air conditioner is turned off using remote control).
TIMER FILTER CLEANING ■ About Timer Filter Cleaning • Filter cleaning timer can be set to run at a specified time daily, given that the air conditioner accumulative operation time is at least 30 minutes and above. • Filter cleaning timer overrides air-conditioner’s timer in any given setting. • Once filter cleaning timer starts, air conditioner operation will stop. After the filter cleaning is completed, the air conditioner operation will resume automatically.
MANUAL FILTER CLEANING ■ About • Press once to run a comprehensive filter cleaning. • A comprehensive filter cleaning may take less than an hour to complete. • When is pressed, this operation has the highest priority over other operation modes. The air conditioner operation will stop. After the filter cleaning is completed, the air conditioner operation will resume automatically. ■ Hint Press to clean the filter manually.
■ Setting Disable Filter Cleaning • To disable the filter cleaning permanently, follow steps 1 to 3 as shown below. 1 Press and hold for more than 20 seconds. ON will blink on the display.* CHANGE FILTER CLEANING DEFAULT SETTING • As a default setting, filter cleaning will run automatically once the air conditioner unit is turned off. 1 Press and hold until you hear 3 beeps (about 11 seconds). 2 Press once. You will hear 1 beep.* 2 Press to select OFF. Auto OFF/ ON button.
AUTO, HEAT, COOL, DRY ■ Operation Details • The power indicator blinks during operation. 1 2 Select your desired operation. Select your desired temperature. (16°C~30°C) • Operation mode is reselected every 30 minutes. HEAT - Heating Operation • In heating mode, it takes a while for the unit to warm up. The power indicator blinks during this operation. COOL - Cooling Operation • Enjoy cool air at your desired temperature.
■ Operation Details VENTILATION • To aerate the room. • As a default setting, ventilation will be turned on automatically once the air conditioner operation starts. VENTILATION : Simultaneous Operation • Operates simultaneously with Auto/ Cooling/Heating/Drying operation. repeatedly to select • Press your desired ventilation setting. Auto/Cooling/Heating/Drying operation remains as normal regardless of ventilation setting.
■ Operations Details • There are 5 fan speeds, as well as automatic*. * For automatic fan speed, the speed of the indoor fan is automatically adjusted according to the operation. AIR SWING • Keeps the room ventilated. • There are 5 options for vertical/ horizontal airflow direction. • Do not adjust the vertical and horizontal louvers by hand. Press to select fan speed • If automatic vertical airflow direction has been set, the louvers swing up and down automatically.
POWERFUL, QUIET ■ Operations Details • To reach the desired set temperature quickly. • To provide a quiet surrounding. ■ Hint • To reduce power consumption during cooling operation, close the curtains to prevent the sunlight and heat from coming in. To enable quiet operation. To enable powerful operation. ● and same time. ● and operations could be cancelled by pressing the respective button again. operations are not able to operate at the Troubleshooting 14 ● Noisy during operation.
TIMER ■ Operation Details • The unit may start in preliminary operation before the actual set time when ON timer has been set. • The set timer repeats daily once set. 2 1 To select your desired time. To select ON or OFF timer. • If there is a power failure, you can restore the previous setting (once power is resumed) by pressing the button. • If the timer is cancelled, press to restore the previous setting. ■ Hint • To dim the indicator display: 3 To confirm the setting.
■ Washing Instructions • Do not use benzene, thinner, bleach or scouring powder. ≃ • Use only soaps ( pH7) or neutral household detergent . • Do not use water hotter than 40°C. INDOOR UNIT • Wipe the unit gently with a soft, dry cloth. CARE & MAINTENANCE Switch off the power supply before cleaning MOVABLE FRONT PANEL Raise and pull to remove. Wash gently and dry. MOVABLE FRONT PANEL & TOP GRILL • Do not remove the movable part from the front panel. • Soak cloth/sponge in lukewarm water with detergent.
Switch off the power supply before cleaning REMOVE THE FRONT AIR FILTER 1 ■ About AIR FILTER • Wash any dusty filter whenever necessary. • Wash/rinse the filter gently with water to avoid damage to the unit surface. • Replace any damage filters. SUPER ALLERU-BUSTER Push upwards to unlock the air filter fastener. • Vacuum the filter whenever necessary. • Replace the filter every 10 years or purchase the replacement filter if it is damaged.
SEASONAL INSPECTION AFTER EXTENDED NON-USE: • Checking of remote control batteries. • No obstruction at inlet and outlet vents. • After 15 minutes of operation, it is normal to have the following temperature difference between inlet and outlet vents: Cooling: ≥ 8°C Heating: ≥ 14°C INSPECCIÓN PERIÓDICA TRAS NO UTILIZAR LA UNIDAD DURANTE UN TIEMPO PROLONGADO DE TIEMPO: • Verifique las pilas del mando a distancia. • Compruebe que las tomas de entrada y salida de aire no están obstruidas.
NON SERVICEABLE CRITERIAS TURN OFF POWER SUPPLY and CALL Authorized Distributor under the following conditions: • Abnormal noise during operation. • Water/foreign particles have entered the Remote Control. • Water leak from Indoor unit. • Circuit breaker switches off frequently. • Power cord becomes unnaturally warm. • Switches or buttons are not functioning properly. NO UTILICE LA UNIDAD SI...
F565101 Matsushita Electric Industrial Co., Ltd. Web Site: http://www.panasonic.co.