Owner manual

Set-Up Features
Set Time
Clock (when set) will display on screen at initial “Turn On”,
after a channel change and when pressing the RECALL
button. The time must be set first in order to operate the
Program ON/OFF Timer.
NOTE: This feature will be disabled when Auto Power
On is activated.
o
1 . Press ACTION .
2. Press ^or^ and*^ or^ to highlight the Set-Up
Icon.
o
3. Press action to display the Set-Up Menu.
rSET?UPJ
SET TIME
ESPANOtlRBANCAIS
4. Press ^ or^ to set hours (set AM/PM accordingly).
5. Press ^ to select minutes position.
6. Press *^or^
o
repeatedly to set minutes.
7. Press ACTION twice to exit menus.
Antenna (Ant)
The proper Input mode must be selected for the type of
signal at the antenna input.
• TV mode is used when the Receiver is not connected to
a cable TV system, for example when using a VHF/UHF
antenna (channels 02 - 69).
• Cable mode is used when the Receiver is connected to
a Cable TV system and you are not using a cable
company converter box (channels 01 - 125).
NOTE: This feature is disabled when Game Guard
Lock is activated.
o
1. Press ACTION .
2. Press A or^ and*^ or ^ to highlight the Set-Up
Icon.
o
3. Press action to display the Set-Up Menu.
SET-UP
4. Press ^ to highlight ANT.
5. Press ^ or ^ to select TV or CABLE.
o
6. Press ACTION twice to exit menus.
Auto Prog
This feature allows you to place all channels with a video
signal into Channel Scan Memory.
NOTE: This feature is disabled when Game Guard
Lock is activated.
o
1. Press ACTION .
2. Press ^ orW and or ^ to highlight the Set-Up
Icon.
o
3. Press ACTION to display the Set-Up Menu.
4. Press ^ to highlight AUTO PROG.
5. Press‘d or^ to start Auto Programming. Channels
will automatically advance until all channels have
been scanned.
O
6. Press ACTION twice after completion of Auto
Programming to exit menus.
NOTE: Channel numbers with signal present will turn blue
which indicates stored in Channel Scan Memory.
-15-